A Fast Prediction Model for Liquid Metal Transfer Modes during the Wire Arc Additive Manufacturing Process
Materials · 06.04.2023 · 16 (7) · 2911
DOI: 10.3390/ma16072911 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.04.2023. Verfasst von Jiaqi Ouyang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Institute of Technology, Beijing Institute of Technology Research Fund.
Abstract (Originalsprache)
The liquid metal transfer mode in wire arc additive manufacturing (WAAM), plays an important role in determining the build quality. In this study, a fast prediction model based on the Young–Laplace equation, momentum equation, and energy conservation, is proposed, to identify the metal transfer modes, including droplet, liquid bridge, and wire stubbing, for a given combination of process parameters. To close the proposed model, high-fidelity numerical simulations are applied, to obtain the necessary inputs required by the former. The proposed model’s accuracy and effectiveness are validated by using experimental data and high-fidelity simulation results. It is proved that the model can effectively predict the transition from liquid bridge, to droplet and wire stubbing modes. In addition, its errors in dripping frequency and liquid bridge height range from 6% to 18%. Moreover, the process parameter windows about transitions of liquid transfer modes have been established based on the model, considering wire feed speed, travel speed, heat source power, and material parameters. The proposed model is expected to serve as a powerful tool for the guidance of process parameter optimization, to achieve high-quality builds.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, China.
- School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China.
ORCID-Profile: Mingjian Li
Förderung
- National Natural Science Foundation of China
- Beijing Institute of Technology
- Beijing Institute of Technology Research Fund
Zitieren
APA
Ouyang, J., Li, M., Lian, Y., Peng, S., & Liu, C. (2023). A Fast Prediction Model for Liquid Metal Transfer Modes during the Wire Arc Additive Manufacturing Process. Materials, 16(7), 2911. https://doi.org/10.3390/ma16072911
Vancouver
Ouyang J, Li M, Lian Y, Peng S, Liu C. A Fast Prediction Model for Liquid Metal Transfer Modes during the Wire Arc Additive Manufacturing Process. Materials. 2023;16(7):2911. doi:10.3390/ma16072911
BibTeX
@article{Ouyang2023,
author = {Ouyang, Jiaqi and Li, Mingjian and Lian, Yanping and Peng, Siyi and Liu, Changmeng},
title = {A Fast Prediction Model for Liquid Metal Transfer Modes during the Wire Arc Additive Manufacturing Process},
journal = {Materials},
year = {2023},
volume = {16},
number = {7},
pages = {2911},
doi = {10.3390/ma16072911}
}
EUVIMED