EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite

Hany R Ammar iD, Subbarayan Sivasankaran iD, El-Sayed M Sherif iD, Fahad A Almufadi, Abdel-Baset H Mekky

Materials · 05.04.2023 · 16 (7) · 2891

DOI: 10.3390/ma16072891 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.04.2023. Verfasst von Hany R Ammar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, College of Engineering, Qassim University, Buraydah 51452, Saudi Arabia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qassim University, represented by the Deanship of Scientific Research, Qassim University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, AA5083–WC composites were developed by ball milling followed by hot consolidation. The microstructures of the developed composites were investigated using XRD, SEM, EDX, and EBSD. The developed composites exhibited a homogeneous dispersion of WC particulates in the AA5083 matrix without any interactions at the matrix/reinforcement interface. The results confirmed the development of a refined equiaxed grain structure of AA5083–WC composites where the EBSD results revealed an average grain size of 4.38 µm and 3.32 µm for AA5083–6%WC (AW-6) and AA5083–12%WC (AW-12) composites, respectively. The results showed that incorporating WC particulates in the AA5083 alloy matrix significantly improved the compressive stress–strain behaviour and considerably enhanced the resistance to wear and friction. The AA5083–12%WC (AW-12) composite displayed the maximum strength and the highest resistance to wear and friction, whereas the as-milled AA5083 alloy (AW-0) exhibited the lowest strength and the least resistance to wear and friction. The AA5083–12%WC (AW-12) composite exhibited the optimum mechanical and tribological behaviour of the developed composites, making it a promising candidate for tribological applications.

Schlagwörter

Stichwörter der Autor:innen

AA5083–matrix compositemechanical propertiesmicrostructure characterizationpowder metallurgytribological behaviourtungsten carbide (WC)

Autor:innen und Institutionen

  • Department of Mechanical Engineering, College of Engineering, Qassim University, Buraydah 51452, Saudi Arabia.
  • Center of Excellence for Research in Engineering Materials (CEREM), Deanship of Scientific Research, King Saud University, Riyadh 11421, Saudi Arabia.
  • Department of Physics, College of Science and Arts El-Meznab, Qassim University, Buraydah 51931, Saudi Arabia.

ORCID-Profile: Hany R Ammar, Subbarayan Sivasankaran, El-Sayed M Sherif

Förderung

  • Qassim University, represented by the Deanship of Scientific Research
  • Qassim University

Zitieren

APA

Ammar, H. R., Sivasankaran, S., Sherif, E. M., Almufadi, F. A., & Mekky, A. H. (2023). Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite. Materials, 16(7), 2891. https://doi.org/10.3390/ma16072891

Vancouver

Ammar HR, Sivasankaran S, Sherif EM, Almufadi FA, Mekky AH. Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite. Materials. 2023;16(7):2891. doi:10.3390/ma16072891

BibTeX
@article{Ammar2023,
  author = {Ammar, Hany R and Sivasankaran, Subbarayan and Sherif, El-Sayed M and Almufadi, Fahad A and Mekky, Abdel-Baset H},
  title = {Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2891},
  doi = {10.3390/ma16072891}
}
Kostenlos starten →