EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Modification and Mechanism of Construction Waste to Solidified Silt

Yannan Shi, Haoxuan Weng, Jiongqi Yu, Yongfan Gong iD

Materials · 30.03.2023 · 16 (7) · 2780

DOI: 10.3390/ma16072780 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.03.2023. Verfasst von Yannan Shi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Zhejiang Guangchuan Engineering Consulting Co., Ltd., Hangzhou 310020, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Water Resources Science and Technology Plan Project of Zhejiang Provincial, the Key R&D Project of Zhejiang Provincial, the Science and Technology Project of Sinohydro Bureau 7 Co., Ltd.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A large amount of silt may be produced in river and lake regulation. It not only occupies land but also pollutes the environment. Therefore, it is urgent to seek effective disposal and utilization methods. Based on the problems of poor stability of stabilized soil and its tendency to soften easily in water, as well as its low strength with low curing agent dosage, this paper proposes a method to improve stabilized soil’s solidification effect by adding materials such as cement, lime, fly ash, triethanolamine, sodium hydroxide, sodium silicate, etc., while mixing different grain diameters and quantities of building waste materials and ordinary sand. Using construction waste and ordinary sand as a comparative test, the curing mechanism of construction waste debris on the mechanical properties, permeability, and microstructure of solidified sludge was studied through unconfined compression tests, dry and wet cycle tests, permeability tests, and micro-structure tests such as XRD, MIP, and SEM. The test results show that the strength increases 8.5%~72.1% by adding building waste materials, and it grew with the increase in particle size and amount. It reduced the content of large pore size of solidified sediment and optimized the internal pore structure. At the same time, it formed a new structure filled by rigid skeleton material. Thus, it improved its unit section stress, built up the curing effect and water stability. The findings of this study can be used to modify solidified silt to improve stability and compaction characteristics.

Schlagwörter

Stichwörter der Autor:innen

curing agentdredged sedimentmechanism analysisskeleton structurestability

Autor:innen und Institutionen

  • Zhejiang Guangchuan Engineering Consulting Co., Ltd., Hangzhou 310020, China.
  • Zhejiang Provincial Key Laboratory of Water Resources Disaster Prevention and Mitigation, Hangzhou 310020, China.
  • College of Architectural Science and Engineering, Yangzhou University, Yangzhou 225127, China.

ORCID-Profile: Yongfan Gong

Förderung

  • the Water Resources Science and Technology Plan Project of Zhejiang Provincial
  • the Key R&D Project of Zhejiang Provincial
  • the Science and Technology Project of Sinohydro Bureau 7 Co., Ltd

Zitieren

APA

Shi, Y., Weng, H., Yu, J., & Gong, Y. (2023). Study on Modification and Mechanism of Construction Waste to Solidified Silt. Materials, 16(7), 2780. https://doi.org/10.3390/ma16072780

Vancouver

Shi Y, Weng H, Yu J, Gong Y. Study on Modification and Mechanism of Construction Waste to Solidified Silt. Materials. 2023;16(7):2780. doi:10.3390/ma16072780

BibTeX
@article{Shi2023,
  author = {Shi, Yannan and Weng, Haoxuan and Yu, Jiongqi and Gong, Yongfan},
  title = {Study on Modification and Mechanism of Construction Waste to Solidified Silt},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2780},
  doi = {10.3390/ma16072780}
}
Kostenlos starten →