EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Mix Design on Physical, Mechanical and Durability Properties of Multi-Recycled Aggregate Concrete

Jeonghyun Kim iD, Anna M Grabiec iD, Andrzej Ubysz iD, Sungchul Yang, Namho Kim iD

Materials · 29.03.2023 · 16 (7) · 2744

DOI: 10.3390/ma16072744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.03.2023. Verfasst von Jeonghyun Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center, National Science Centre, Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The decrease in the quality of recycled aggregate due to an increase in the number of recycling is a primary factor that limits the multi-recycling of concrete. This degradation adversely affects concrete performance; thus, the characteristics of recycled aggregate should be considered during the mix design stage, but little research has taken that into account. This study investigates the effect of the equivalent mortar volume (EMV) mix design on some physical, mechanical and durability properties of concrete made of multiple recycled coarse aggregates at 50% and 100% replacement ratios compared to concrete made by the conventional mix design (CMD). The results showed that the performances of concrete by the CMD decreased with an increasing number of recycling cycles. The properties of EMV-based concrete deteriorated with an increase in the number of recycling cycles at 100% replacement ratio due to poor workability caused by a shortage of fresh mortar. However, at 50% replacement, the EMV-based concrete exhibited similar performance across the three cycles of recycling, as well as improved properties over natural aggregate concrete. This study demonstrated that an appropriate mix design and optimal aggregate replacement ratio can offset the property loss of multiple recycled aggregate concrete.

Schlagwörter

Stichwörter der Autor:innen

concrete mix designconstruction and demolition wastegreen constructionrecycled concrete aggregaterepeated recyclingtrue sustainability

Autor:innen und Institutionen

  • Faculty of Civil Engineering, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland.
  • Faculty of Environmental Engineering and Mechanical Engineering, Poznań University of Life Sciences, 60-649 Poznań, Poland.
  • School of Architectural Engineering, Hongik University, 2639 Sejong-ro, Jochiwon, Sejong 30016, Republic of Korea.
  • School of Industrial Design & Architectural Engineering, Korea University of Technology & Education, 1600 Chungjeol-ro, Byeongcheon-myeon, Dongnam-gu, Cheonan 31253, Republic of Korea.

ORCID-Profile: Jeonghyun Kim, Anna M Grabiec, Andrzej Ubysz, Namho Kim

Förderung

  • National Science Center
  • National Science Centre, Poland

Zitieren

APA

Kim, J., Grabiec, A. M., Ubysz, A., Yang, S., & Kim, N. (2023). Influence of Mix Design on Physical, Mechanical and Durability Properties of Multi-Recycled Aggregate Concrete. Materials, 16(7), 2744. https://doi.org/10.3390/ma16072744

Vancouver

Kim J, Grabiec AM, Ubysz A, Yang S, Kim N. Influence of Mix Design on Physical, Mechanical and Durability Properties of Multi-Recycled Aggregate Concrete. Materials. 2023;16(7):2744. doi:10.3390/ma16072744

BibTeX
@article{Kim2023,
  author = {Kim, Jeonghyun and Grabiec, Anna M and Ubysz, Andrzej and Yang, Sungchul and Kim, Namho},
  title = {Influence of Mix Design on Physical, Mechanical and Durability Properties of Multi-Recycled Aggregate Concrete},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2744},
  doi = {10.3390/ma16072744}
}
Kostenlos starten →