EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison to Micro Wear Mechanism of PVD Chromium Coatings and Electroplated Hard Chromium

Zhongyi Yang, Ning Zhang, Hongtao Li iD, Bo Chen, Bo Yang

Materials · 28.03.2023 · 16 (7) · 2695

DOI: 10.3390/ma16072695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.03.2023. Verfasst von Zhongyi Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211800, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electroplated hard chromium (EPHC) has been widely used in industry due to its excellent mechanical properties, but the development of this technology is limited by environmental risks. The physical vapor deposition (PVD) process has shown promise as an alternative to EPHC for producing chromium-based coatings. In this research, we investigate the microstructure and wear resistance of pure chromium coatings using two PVD techniques, namely, magnetron sputtering ion plating (MSIP) and micro-arc ion plating (MAIP), which are compared to EPHC. To assess wear resistance, we evaluated factors such as hardness, coating base bonding force, wear rate and friction coefficient via friction and wear experiments. The results show that, in terms of microstructure, while the EPHC coating does not exhibit a strong preferred growth orientation, the PVD coatings exhibit an obvious preferred growth orientation along the (110) direction. The average grain size of the EPHC coating is the smallest, and the PVD chromium coatings show a higher hardness than the EPHC coating. The results of pin-on-disk tests show that there is little difference in friction coefficients between EPHC and MAIP chromium plating; however, the MAIP chromium coating showed an excellent specific wear rate (as low as 1.477 × 10−13 m3/Nm). The wear condition of the MAIP chromium coating is more stable than that of the EPHC coating, indicating its potential as a replacement for EPHC.

Schlagwörter

Stichwörter der Autor:innen

chromium coatingselectroplated hard chromiumphysical vapor depositiontribological behavior

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211800, China.
  • Jiangyin Innovation Institute of Metal Materials Co., Ltd., Wuxi 214433, China.

ORCID-Profile: Hongtao Li

Zitieren

APA

Yang, Z., Zhang, N., Li, H., Chen, B., & Yang, B. (2023). Comparison to Micro Wear Mechanism of PVD Chromium Coatings and Electroplated Hard Chromium. Materials, 16(7), 2695. https://doi.org/10.3390/ma16072695

Vancouver

Yang Z, Zhang N, Li H, Chen B, Yang B. Comparison to Micro Wear Mechanism of PVD Chromium Coatings and Electroplated Hard Chromium. Materials. 2023;16(7):2695. doi:10.3390/ma16072695

BibTeX
@article{Yang2023,
  author = {Yang, Zhongyi and Zhang, Ning and Li, Hongtao and Chen, Bo and Yang, Bo},
  title = {Comparison to Micro Wear Mechanism of PVD Chromium Coatings and Electroplated Hard Chromium},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2695},
  doi = {10.3390/ma16072695}
}
Kostenlos starten →