Strength and Cyclic Properties of Additive vs. Conventionally Produced Material AlSi10Mg
Materials · 24.03.2023 · 16 (7) · 2598
DOI: 10.3390/ma16072598 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2023. Verfasst von Vladimír Chmelko und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Applied Mechanics and Mechatronics, Slovak University of Technology in Bratislava, Námestie Slobody 17, 81231 Bratislava, Slovakia. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Agency of the Czech Republic.
Abstract (Originalsprache)
Additive metals are practically identical in strength to the properties of conventionally produced materials. This article experimentally analyses strength properties and fatigue properties in the tensile–pressure mode for two different directions of 3D printing of AlSi10Mg material. The resulting fatigue parameters of the Basquin curve are confronted with a conventionally produced alloy of the same composition. The microstructure analysis explains the different fatigue properties obtained by these two material production technologies. Phenomena such as strength enhancement in additive manufacturing material, anisotropy of cyclic properties, and cyclic hardening are discussed. The limits of current additive manufacturing are clarified, and the future direction of research in this field is outlined.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Applied Mechanics and Mechatronics, Slovak University of Technology in Bratislava, Námestie Slobody 17, 81231 Bratislava, Slovakia.
- Institute of Informatics, Slovak Academy of Sciences, Dúbravská Cesta 9, 84507 Bratislava, Slovakia.
ORCID-Profile: Vladimír Chmelko, Miroslav Šulko, Jaroslava Škriniarová, Matúš Margetin
Förderung
- Technology Agency of the Czech Republic
Zitieren
APA
Chmelko, V., Šulko, M., Škriniarová, J., Margetin, M., Gašparík, M., Koščo, T., & Semeš, M. (2023). Strength and Cyclic Properties of Additive vs. Conventionally Produced Material AlSi10Mg. Materials, 16(7), 2598. https://doi.org/10.3390/ma16072598
Vancouver
Chmelko V, Šulko M, Škriniarová J, Margetin M, Gašparík M, Koščo T, et al. Strength and Cyclic Properties of Additive vs. Conventionally Produced Material AlSi10Mg. Materials. 2023;16(7):2598. doi:10.3390/ma16072598
BibTeX
@article{Chmelko2023,
author = {Chmelko, Vladimír and Šulko, Miroslav and Škriniarová, Jaroslava and Margetin, Matúš and Gašparík, Marek and Koščo, Tomáš and Semeš, Marián},
title = {Strength and Cyclic Properties of Additive vs. Conventionally Produced Material AlSi10Mg},
journal = {Materials},
year = {2023},
volume = {16},
number = {7},
pages = {2598},
doi = {10.3390/ma16072598}
}
EUVIMED