EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region

Chen Chen iD, Aixu Wang, Zhi Zheng, Qing Zhao, Zhanli Shi, Yongjie Bao

Materials · 24.03.2023 · 16 (7) · 2586

DOI: 10.3390/ma16072586 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2023. Verfasst von Chen Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber reinforced plastics (CFRP)/titanium alloy (Ti) stacks have been widely used in aviation field due to the superior mechanical properties. During integrated drilling of CFRP/Ti stacks, serious damage occurs in the CFRP layer because of the disparate properties of two stack components. Heat accumulation and thermal induced damage are typical and critical issue during drilling stacks, especially in the interface region. In this study, in order to deeply analyze the thermal influence of the interface region, a numerical model based on the finite difference method is developed to predict the three-dimensional drilling temperature field. Experiments with accurate measurement point are conducted to valid the rational of temperature prediction model. The results confirm that the temperature distributions predicted by numerical study have good agreements with the experimental results and the maximum error is about 10.3%. Furtherly, based on the drilling experiments, it can be found that thermal damage induced by cutting heat occurs as discoloration rings around the hole which could cause the elastic modulus of resin matrix decrease. An empirical model of thermal damage with maximum drilling temperature of the interface region are developed with the correlation of R2 = 0.97. The findings point out that as the maximum drilling temperature exceeds 410 °C, serious thermal damage could occur in the resin matrix of CFRP layer.

Schlagwörter

Stichwörter der Autor:innen

CFRP/Ti stacksdrillinginterface regiontemperature fieldthermal damage

Autor:innen und Institutionen

  • Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China.
  • School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China.
  • Marine Engineering College, Dalian Maritime University, Dalian 116026, China.

ORCID-Profile: Chen Chen

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Chen, C., Wang, A., Zheng, Z., Zhao, Q., Shi, Z., & Bao, Y. (2023). A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region. Materials, 16(7), 2586. https://doi.org/10.3390/ma16072586

Vancouver

Chen C, Wang A, Zheng Z, Zhao Q, Shi Z, Bao Y. A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region. Materials. 2023;16(7):2586. doi:10.3390/ma16072586

BibTeX
@article{Chen2023,
  author = {Chen, Chen and Wang, Aixu and Zheng, Zhi and Zhao, Qing and Shi, Zhanli and Bao, Yongjie},
  title = {A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2586},
  doi = {10.3390/ma16072586}
}
Kostenlos starten →