EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Formation of PLGA–PEDOT: PSS Conductive Scaffolds by Supercritical Foaming

Antonio Montes iD, Diego Valor iD, Yaiza Penabad, Manuel Domínguez iD, Clara Pereyra iD, Enrique Martínez de la Ossa iD

Materials · 18.03.2023 · 16 (6) · 2441

DOI: 10.3390/ma16062441 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.03.2023. Verfasst von Antonio Montes und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Food Technology, Faculty of Sciences, University of Cadiz, International Excellence Agrifood Campus (CeiA3), 1…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The usage of conjugated materials for the fabrication of foams intended to be used as therapeutic scaffolds is gaining relevance these days, as they hold certain properties that are not exhibited by other polymer types that have been regularly used until the present. Hence, this work aims to design a specific supercritical CO2 foaming process that would allow the production of porous polymeric devices with improved conductive properties, which would better simulate matrix extracellular conditions when used as therapeutic scaffolds (PLGA–PEDOT:PSS) systems. The effects of pressure, temperature, and contact time on the expansion factor, porosity, mechanical properties, and conductivity of the foam have been evaluated. The foams have been characterized by scanning electron and atomic force microscopies, liquid displacement, PBS degradation test, compression, and resistance to conductivity techniques. Values close to 40% porosity were obtained, with a uniform distribution of polymers on the surface and in the interior, expansion factors of up to 10 orders, and a wide range of conductivity values (2.2 × 10−7 to 1.0 × 10−5 S/cm) and mechanical properties (0.8 to 13.6 MPa Young’s modulus in compression test). The conductive and porous scaffolds that have been produced by supercritical CO2 in this study show an interesting potential for tissue engineering and for neural or cardiac tissue regeneration purposes due to the fact that electrical conductivity is a crucial factor for proper cell function and tissue development.

Schlagwörter

Stichwörter der Autor:innen

PLGAconductivepolymerporositysupercritical foaming

Autor:innen und Institutionen

  • Department of Chemical Engineering and Food Technology, Faculty of Sciences, University of Cadiz, International Excellence Agrifood Campus (CeiA3), 11510 Puerto Real, Cadiz, Spain.
  • Department Condensed Matter Physics and Institute of Electron Microscopy and Materials, Faculty of Sciences, University of Cadiz, International Excellence Agrifood Campus (CeiA3), 11510 Puerto Real, Cadiz, Spain.

ORCID-Profile: Antonio Montes, Diego Valor, Manuel Domínguez, Clara Pereyra, Enrique Martínez de la Ossa

Förderung

  • Spanish Ministry of Science and Innovation

Zitieren

APA

Montes, A., Valor, D., Penabad, Y., Domínguez, M., Pereyra, C., & de la Ossa, E. M. (2023). Formation of PLGA–PEDOT: PSS Conductive Scaffolds by Supercritical Foaming. Materials, 16(6), 2441. https://doi.org/10.3390/ma16062441

Vancouver

Montes A, Valor D, Penabad Y, Domínguez M, Pereyra C, de la Ossa EM. Formation of PLGA–PEDOT: PSS Conductive Scaffolds by Supercritical Foaming. Materials. 2023;16(6):2441. doi:10.3390/ma16062441

BibTeX
@article{Montes2023,
  author = {Montes, Antonio and Valor, Diego and Penabad, Yaiza and Domínguez, Manuel and Pereyra, Clara and de la Ossa, Enrique Martínez},
  title = {Formation of PLGA–PEDOT: PSS Conductive Scaffolds by Supercritical Foaming},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2441},
  doi = {10.3390/ma16062441}
}
Kostenlos starten →