EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of Ferritic ODS Steels Obtained by Laser Additive Manufacturing

Lucas Autones iD, Pascal Aubry, Joel Ribis iD, Hadrien Leguy, Alexandre Legris, Yann de Carlan

Materials · 16.03.2023 · 16 (6) · 2397

DOI: 10.3390/ma16062397 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.03.2023. Verfasst von Lucas Autones und 5 weiteren Autor:innen. Beteiligte Einrichtung: Service de Recherches Métallurgiques Appliquées, Université Paris-Saclay, CEA, 91191 Gif-sur-Yvette, France. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, European Union via the Euratom Research and Training Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to assess the potential of Laser Additive Manufacturing (LAM) for the elaboration of Ferritic/Martensitic ODS steels. These materials are usually manufactured by mechanical alloying of powders followed by hot consolidation in a solid state. Two Fe-14Cr-1W ODS powders are considered for this study. The first powder was obtained by mechanical alloying, and the second was through soft mixing of an atomized Fe-14Cr steel powder with yttria nanoparticles. They are representative of the different types of powders that can be used for LAM. The results obtained with the Laser Powder Bed Fusion (LPBF) process are compared to a non-ODS powder and to a conventional ODS material obtained by Hot Isostatic Pressing (HIP). The microstructural and mechanical characterizations show that it is possible to obtain nano-oxides in the material, but their density remains low compared to HIP ODS steels, regardless of the initial powders considered. The ODS obtained by LAM have mechanical properties which remain modest compared to conventional ODS. The current study demonstrated that it is very difficult to obtain F/M ODS grades with the expected characteristics by using LAM processes. Indeed, even if significant progress has been made, the powder melting stage strongly limits, for the moment, the possibility of obtaining fine and dense precipitation of nano-oxides in these steels.

Schlagwörter

Stichwörter der Autor:innen

Oxide Dispersion Strengthened (ODS) steelsPowder Bed Fusion (PBF)Small Angle X-ray Scattering (SAXS)additive manufacturingferritic steelstransmission electron microscopy (TEM)

Autor:innen und Institutionen

  • Service de Recherches Métallurgiques Appliquées, Université Paris-Saclay, CEA, 91191 Gif-sur-Yvette, France.
  • Service d'Études Analytiques et de Réactivité des Surfaces, Université Paris-Saclay, CEA, 91191 Gif-sur-Yvette, France.
  • Unité Matériaux et Transformations, Université de Lille, 59655 Villeneuve d'Ascq, France.

ORCID-Profile: Lucas Autones, Joel Ribis

Förderung

  • European Union
  • European Union via the Euratom Research and Training Programme

Zitieren

APA

Autones, L., Aubry, P., Ribis, J., Leguy, H., Legris, A., & de Carlan, Y. (2023). Assessment of Ferritic ODS Steels Obtained by Laser Additive Manufacturing. Materials, 16(6), 2397. https://doi.org/10.3390/ma16062397

Vancouver

Autones L, Aubry P, Ribis J, Leguy H, Legris A, de Carlan Y. Assessment of Ferritic ODS Steels Obtained by Laser Additive Manufacturing. Materials. 2023;16(6):2397. doi:10.3390/ma16062397

BibTeX
@article{Autones2023,
  author = {Autones, Lucas and Aubry, Pascal and Ribis, Joel and Leguy, Hadrien and Legris, Alexandre and de Carlan, Yann},
  title = {Assessment of Ferritic ODS Steels Obtained by Laser Additive Manufacturing},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2397},
  doi = {10.3390/ma16062397}
}
Kostenlos starten →