EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Fly Ash—Slag One-Part Geopolymers with Improved Properties

Iman Faridmehr iD, Mohammad Ali Sahraei iD, Moncef L Nehdi iD, Kiyanets A Valerievich

Materials · 15.03.2023 · 16 (6) · 2348

DOI: 10.3390/ma16062348 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.03.2023. Verfasst von Iman Faridmehr und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Building Construction and Structural Theory, South Ural State University, 76 pr. Lenina, 454080 Chelyabinsk, Russia. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One-part geopolymer concrete/mortar is a pre-mixed material made from industrial by-products and solid alkaline activators that only requires the addition of water for activation. Apart from being environmentally friendly, it also reduces complexity and improves consistency in the mixing process, leading to more efficient production and consistent material properties. However, developing one-part geopolymer concrete with desirable compressive strength is challenging because of the complexity of the chemical reaction involved, the variability of the raw materials used, and the need for precise control of curing conditions. Therefore, 80 different one-part geopolymer mixtures were compiled from the open literature in this study, and the effects of the constituent materials, the dosage of alkaline activators, curing condition, and water/binder ratio on the 28-day compressive strength of one-part geopolymer paste were examined in detail. An ANN model with the Levenberg–Marquardt algorithm was developed to estimate one-part geopolymer’s compressive strength and its sensitivity to binder constituents and alkaline dosage. The ANN model’s weights and biases were also used to develop a CPLEX-based optimization method for achieving maximum compressive strength. The results confirm that the compressive strength of one-part geopolymer pastes increased by increasing the Na2O content of the alkaline source and the slag dosage; however, increasing the Na2O content in alkaline sources beyond 6% by fly ash weight led to decreasing the compressive strength; therefore, the optimum alkaline activator dosage by weight of fly ash was to be 12% (i.e., 6% Na2O). The proposed ANN model developed in this study can aid in the production and performance tuning of sustainable one-part geopolymer concrete and mortar for broader full-scale applications.

Schlagwörter

Stichwörter der Autor:innen

alkali-activated materialartificial neural networkcompressive strengthindustrial by-productone-part geopolymer concrete

Autor:innen und Institutionen

  • Department of Building Construction and Structural Theory, South Ural State University, 76 pr. Lenina, 454080 Chelyabinsk, Russia.
  • Department of Civil Engineering, College of Engineering, University of Buraimi, Al Buraimi 512, Oman.
  • Department of Civil Engineering, McMaster University, Hamilton, ON L8S 4M6, Canada.

ORCID-Profile: Iman Faridmehr, Mohammad Ali Sahraei, Moncef L Nehdi

Zitieren

APA

Faridmehr, I., Sahraei, M. A., Nehdi, M. L., & Valerievich, K. A. (2023). Optimization of Fly Ash—Slag One-Part Geopolymers with Improved Properties. Materials, 16(6), 2348. https://doi.org/10.3390/ma16062348

Vancouver

Faridmehr I, Sahraei MA, Nehdi ML, Valerievich KA. Optimization of Fly Ash—Slag One-Part Geopolymers with Improved Properties. Materials. 2023;16(6):2348. doi:10.3390/ma16062348

BibTeX
@article{Faridmehr2023,
  author = {Faridmehr, Iman and Sahraei, Mohammad Ali and Nehdi, Moncef L and Valerievich, Kiyanets A},
  title = {Optimization of Fly Ash—Slag One-Part Geopolymers with Improved Properties},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2348},
  doi = {10.3390/ma16062348}
}
Kostenlos starten →