EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Filtration Efficiency of Natural Materials with the Addition of Electrospun Poly(vinylidene fluoride-co-hexafluoropropylene) Fibres

Gregor Filipič, Luka Pirker iD, Anja Pogačnik Krajnc iD, Marjan Ješelnik, Maja Remškar iD

Materials · 14.03.2023 · 16 (6) · 2314

DOI: 10.3390/ma16062314 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.03.2023. Verfasst von Gregor Filipič und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jozef Stefan Institute, Jamova Cesta 39, 1000 Ljubljana, Slovenia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pollutants and infectious diseases can spread through air with airborne droplets and aerosols. A respiratory mask can decrease the amount of pollutants we inhale and it can protect us from airborne diseases. With the onset of the COVID-19 pandemic, masks became an everyday item used by a lot of people around the world. As most of them are for a single use, the amount of non-recyclable waste increased dramatically. The plastic from which the masks are made pollutes the environment with various chemicals and microplastic. Here, we investigated the time- and size-dependent filtration efficiency (FE) of aerosols in the range of 25.9 to 685.4 nm of five different natural materials whose FE was enhanced using electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF) fibres. A scanning electron microscope (SEM) was used to determine the morphology and structure of the natural materials as well as the thickness of the PVDF fibres, while the phase of the electrospun fibres was determined by Raman spectroscopy. A thin layer of the electrospun PVDF fibres with the same grammage was sandwiched between two sheets of natural materials, and their FE increased up to 80%. By varying the grammature of the electrospun polymer, we tuned the FE of cotton from 82.6 to 99.9%. Thus, through the optimization of the grammage of the electrospun polymer, the amount of plastic used in the process can be minimized, while achieving sufficiently high FE.

Schlagwörter

Stichwörter der Autor:innen

PVDFaerosolselectrospun fibresfiltration efficiencymasks

Autor:innen und Institutionen

  • Jozef Stefan Institute, Jamova Cesta 39, 1000 Ljubljana, Slovenia.
  • Department of Electrochemical Materials, J. Heyrovsky Institute of Physical Chemistry, Dolejškova 3, 182 23 Prague, Czech Republic.
  • Faculty of Mathematics and Physics, University of Ljubljana, Jadranska Ulica 19, 1000 Ljubljana, Slovenia.
  • smartMelamine d.o.o., Tomšičeva Cesta 9, 1330 Kočevje, Slovenia.

ORCID-Profile: Luka Pirker, Anja Pogačnik Krajnc, Maja Remškar

Förderung

  • Slovenian Research Agency

Zitieren

APA

Filipič, G., Pirker, L., Krajnc, A. P., Ješelnik, M., & Remškar, M. (2023). Enhanced Filtration Efficiency of Natural Materials with the Addition of Electrospun Poly(vinylidene fluoride-co-hexafluoropropylene) Fibres. Materials, 16(6), 2314. https://doi.org/10.3390/ma16062314

Vancouver

Filipič G, Pirker L, Krajnc AP, Ješelnik M, Remškar M. Enhanced Filtration Efficiency of Natural Materials with the Addition of Electrospun Poly(vinylidene fluoride-co-hexafluoropropylene) Fibres. Materials. 2023;16(6):2314. doi:10.3390/ma16062314

BibTeX
@article{Filipi2023,
  author = {Filipič, Gregor and Pirker, Luka and Krajnc, Anja Pogačnik and Ješelnik, Marjan and Remškar, Maja},
  title = {Enhanced Filtration Efficiency of Natural Materials with the Addition of Electrospun Poly(vinylidene fluoride-co-hexafluoropropylene) Fibres},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2314},
  doi = {10.3390/ma16062314}
}
Kostenlos starten →