Effects of Heat Treatment on the Interface Microstructure and Mechanical Properties of Friction-Stir-Processed AlCoCrFeNi/A356 Composites
Materials · 10.03.2023 · 16 (6) · 2234
DOI: 10.3390/ma16062234 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.03.2023. Verfasst von Shengqing Hu und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the funds of the State Key Laboratory of Solidification Processing in NPU, State Key Laboratory of Solidification Processing in NPU.
Abstract (Originalsprache)
Equiatomic AlCoCrFeNi high-entropy alloy (HEA) has gained significant interest in recent years because of its excellent mechanical properties. A356 aluminum alloy reinforced by AlCoCrFeNi HEA particles was fabricated by friction stir processing (FSP) and subsequent heat treatment. Solution and aging treatments were specially performed for the composites to control the interface microstructure, and interfacial microstructure and tensile properties were explored at different conditions. The interface between the matrix and HEA particles showed a dual-layered core–shell structure and the thickness of the shell region increased with the solution time. The microstructure located in the shell layers consisted of a solid solution with increasing aluminum content, in which a radial-shaped solid solution phase formed in the region close to the core of the HEA particle and scattered solid solution grains with high Ni content formed in the region close to the matrix alloy. The gradient of composition and microstructure across the HEA/Al interface can be obtained through heat treatment, and an optimal interface bonding state and mechanical property were obtained after solution treatment for 2 h. Compared with FSPed A356 aluminum alloy, the FSPed composite enhanced the tensile stress by 60 MPa and the stain by 5% under the optimized conditions. The overgrowth of the shell layer decreased both the tensile strength and the ductile greatly due to the formation of a radial-shaped solid solution phase in the shell region.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
- State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China.
Förderung
- the National Natural Science Foundation of China
- the funds of the State Key Laboratory of Solidification Processing in NPU
- State Key Laboratory of Solidification Processing in NPU
- National Natural Science Foundation of China
Zitieren
APA
Hu, S., Wang, K., Ma, S., Qi, H., He, N., & Li, F. (2023). Effects of Heat Treatment on the Interface Microstructure and Mechanical Properties of Friction-Stir-Processed AlCoCrFeNi/A356 Composites. Materials, 16(6), 2234. https://doi.org/10.3390/ma16062234
Vancouver
Hu S, Wang K, Ma S, Qi H, He N, Li F. Effects of Heat Treatment on the Interface Microstructure and Mechanical Properties of Friction-Stir-Processed AlCoCrFeNi/A356 Composites. Materials. 2023;16(6):2234. doi:10.3390/ma16062234
BibTeX
@article{Hu2023,
author = {Hu, Shengqing and Wang, Kai and Ma, Simu and Qi, Haoran and He, Naijun and Li, Fuguo},
title = {Effects of Heat Treatment on the Interface Microstructure and Mechanical Properties of Friction-Stir-Processed AlCoCrFeNi/A356 Composites},
journal = {Materials},
year = {2023},
volume = {16},
number = {6},
pages = {2234},
doi = {10.3390/ma16062234}
}
EUVIMED