The Effect of Biological Corrosion on the Hydration Processes of Synthetic Tricalcium Aluminate (C3A)
Materials · 10.03.2023 · 16 (6) · 2225
DOI: 10.3390/ma16062225 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.03.2023. Verfasst von Michał Pyzalski und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30 Street, 30-059 Kraków, Poland. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Poznań University of Life Sciences, AGH University of Science and Technology.
Abstract (Originalsprache)
This paper presents a study related to the biological degradation of a tricalcium aluminate (C3A) phase treated with reactive media from the agricultural industry. During one month of setting and hardening, synthetic C3A was subjected to corrosion in corn silage, pig slurry and chicken manure. The hardening process of the C3A phase in water was used as a reference sample. The phase composition and microstructure of the hydrating tricalcium aluminate slurries were characterised by X-ray diffraction (XRD), thermal analysis (DTA/TG/DTG/EGA), scanning microscopy (SEM, EDS) and infrared spectroscopy (FT-IR). In the samples studied, it was observed that the qualitative and quantitative phase composition of the synthetic tricalcium aluminate preparations changed depending on the corrosion exposure conditions. The main crystalline phases formed by the hydration of the examined samples in water as well as in corrosive media were the catoite (Ca3Al2(OH)12) and hydrocalumite (Ca2Al(OH)7·3H2O) phases. Detailed analysis showed the occurrence of secondary crystallisation in hydrating samples and the phases were mainly calcium carbonates (CaCO3) with different crystallite sizes. In the phase composition of the C3A pastes, varying amounts of aluminium hydroxides (Al(OH)3) were also present. The crystalline phases formed as a result of secondary crystallisation represented biological corrosion products, probably resulting from the reaction of hydrates with secondary products resulting from the metabolic processes of anaerobic bacterial respiration (from living matter) associated with the presence of bacteria in the reaction medium. The results obtained contribute towards the development of fast-acting and bio-corrosion-resistant special cements for use in bioenergetics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30 Street, 30-059 Kraków, Poland.
- Department of Biosystems Engineering, Faculty of Environmental and Mechanical Engineering, Poznań University of Life Sciences, Wojska Polskiego 50 Street, 60-627 Poznań, Poland.
ORCID-Profile: Michał Pyzalski, Agnieszka Sujak, Karol Durczak, Paweł Murzyn, Maciej Sitarz
Förderung
- Poznań University of Life Sciences
- AGH University of Science and Technology
Zitieren
APA
Pyzalski, M., Sujak, A., Durczak, K., Murzyn, P., Brylewski, T., & Sitarz, M. (2023). The Effect of Biological Corrosion on the Hydration Processes of Synthetic Tricalcium Aluminate (C3A). Materials, 16(6), 2225. https://doi.org/10.3390/ma16062225
Vancouver
Pyzalski M, Sujak A, Durczak K, Murzyn P, Brylewski T, Sitarz M. The Effect of Biological Corrosion on the Hydration Processes of Synthetic Tricalcium Aluminate (C3A). Materials. 2023;16(6):2225. doi:10.3390/ma16062225
BibTeX
@article{Pyzalski2023,
author = {Pyzalski, Michał and Sujak, Agnieszka and Durczak, Karol and Murzyn, Paweł and Brylewski, Tomasz and Sitarz, Maciej},
title = {The Effect of Biological Corrosion on the Hydration Processes of Synthetic Tricalcium Aluminate (C3A)},
journal = {Materials},
year = {2023},
volume = {16},
number = {6},
pages = {2225},
doi = {10.3390/ma16062225}
}
EUVIMED