A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding
Materials · 09.03.2023 · 16 (6) · 2212
DOI: 10.3390/ma16062212 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.03.2023. Verfasst von Yunxia Chen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shanghai Dianji University, Shanghai 201306, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shanghai Committee of Science and Technology.
Abstract (Originalsprache)
Welding and the behavior of the weldments are important, since welding of high strength low alloy (HSLA) steels is a conventional method for manufacturing industrial parts. This work conducts a comparative investigation of microstructural characteristics and mechanical properties for joints of 16-mm-thick HSLA Q890 steel produced by multi-layer multi-pass shielded metal arc welding (SMAW) with filler wire and single-layer autogenous laser beam welding (LBW). The mechanical properties of the welded joints were assessed in terms of tensile and impact using butt joints. The results show that tensile failure occurred in the base metal during the tensile tests for most of the trials. The ultimate tensile strength and percent elongation of the LBW welded joint (973.5 MPa and 10%) are higher than those of the SMAW joint (951 MPa and 2.9%) due to the filler filling process of the SMAW process. The Charpy impact energy of the weld metal (16.4 J and 15.1 J) is lower than that of the heat-affected zone (18.5 J and 19.5 J) in the LBW joint and the SMAW joint.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Shanghai Dianji University, Shanghai 201306, China.
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, Shanghai 200240, China.
Förderung
- National Natural Science Foundation of China
- Shanghai Committee of Science and Technology
Zitieren
APA
Chen, Y., Xu, X., Liu, Y., & Cui, H. (2023). A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding. Materials, 16(6), 2212. https://doi.org/10.3390/ma16062212
Vancouver
Chen Y, Xu X, Liu Y, Cui H. A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding. Materials. 2023;16(6):2212. doi:10.3390/ma16062212
BibTeX
@article{Chen2023,
author = {Chen, Yunxia and Xu, Xiao and Liu, Yanjing and Cui, Haichao},
title = {A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding},
journal = {Materials},
year = {2023},
volume = {16},
number = {6},
pages = {2212},
doi = {10.3390/ma16062212}
}
EUVIMED