EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Zaidong Liu, Yalei Wang, Xiang Xiong, Zhiyong Ye iD, Quanyuan Long, Jinming Wang, Tongqi Li, Congcong Liu

Materials · 06.03.2023 · 16 (5) · 2120

DOI: 10.3390/ma16052120 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.03.2023. Verfasst von Zaidong Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Major Project of Science and Technology Plan of Changsha, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

C/C-SiC-(ZrxHf1−x)C composites were prepared by the reactive melt infiltration method. The microstructure of the porous C/C skeleton and the C/C-SiC-(ZrxHf1−x)C composites, as well as the structural evolution and ablation behavior of the C/C-SiC-(ZrxHf1−x)C composites, were systematically investigated. The results show that the C/C-SiC-(ZrxHf1−x)C composites were mainly composed of carbon fiber, carbon matrix, SiC ceramic, (ZrxHf1−x)C and (ZrxHf1−x)Si2 solid solutions. The refinement of the pore structure is beneficial to promote the formation of (ZrxHf1−x)C ceramic. The C/C-SiC-(ZrxHf1−x)C composites exhibited outstanding ablation resistance under an air–plasma environment at around 2000 °C. After ablation for 60 s, CMC-1 appeared to possess the minimum mass and linear ablation rates of only 2.696 mg/s and −0.814 µm/s, respectively, which are lower than those of CMC-2 and CMC-3. During the ablation process, a Bi-liquid phase and a liquid–solid two-phase structure were formed on the ablation surface which could act as an oxygen diffusion barrier to retard further ablation, which is responsible for the excellent ablation resistance of the C/C-SiC-(ZrxHf1−x)C composites.

Schlagwörter

Stichwörter der Autor:innen

ablation behaviorceramic matrix compositesmicrostructurereactive melt infiltration

Autor:innen und Institutionen

  • State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.
  • Science and Technology of Advanced Functional Composites Laboratory, Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China.

ORCID-Profile: Zhiyong Ye

Förderung

  • National Key R&D Program of China
  • Major Project of Science and Technology Plan of Changsha
  • National Key R&D Program of China

Zitieren

APA

Liu, Z., Wang, Y., Xiong, X., Ye, Z., Long, Q., Wang, J., Li, T., & Liu, C. (2023). Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method. Materials, 16(5), 2120. https://doi.org/10.3390/ma16052120

Vancouver

Liu Z, Wang Y, Xiong X, Ye Z, Long Q, Wang J, et al. Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method. Materials. 2023;16(5):2120. doi:10.3390/ma16052120

BibTeX
@article{Liu2023,
  author = {Liu, Zaidong and Wang, Yalei and Xiong, Xiang and Ye, Zhiyong and Long, Quanyuan and Wang, Jinming and Li, Tongqi and Liu, Congcong},
  title = {Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {2120},
  doi = {10.3390/ma16052120}
}
Kostenlos starten →