EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Zhipei Chen, Xiaona Ren iD, Peng Wang, Jiangxiong Hu, Changchun Ge

Materials · 03.03.2023 · 16 (5) · 2082

DOI: 10.3390/ma16052082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.03.2023. Verfasst von Zhipei Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Powder Metallurgy and Advanced Ceramics, University of Science & Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: XiaoNa Ren, State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, China (2021Z-08).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, Ni35Co35Cr12.6Al7.5Ti5Mo1.68W1.39Nb0.95Ta0.47 high entropy alloy (HEA) was prepared using mechanical alloying (MA) and spark plasma sintering (SPS) based on the unique design concept of HEAs and third-generation powder superalloys. The HEA phase formation rules of the alloy system were predicted but need to be verified empirically. The microstructure and phase structure of the HEA powder were investigated at different milling times and speeds, with different process control agents, and with an HEA block sintered at different temperatures. The milling time and speed do not affect the alloying process of the powder and increasing the milling speed reduces the powder particle size. After 50 h of milling with ethanol as PCA, the powder has a dual-phase FCC+BCC structure, and stearic acid as PCA inhibits the powder alloying. When the SPS temperature reaches 950 °C, the HEA transitions from a dual-phase to a single FCC phase structure and, with increasing temperature, the mechanical properties of the alloy gradually improve. When the temperature reaches 1150 °C, the HEA has a density of 7.92 g cm−3, a relative density of 98.7%, and a hardness of 1050 HV. The fracture mechanism is one with a typical cleavage, a brittle fracture with a maximum compressive strength of 2363 MPa and no yield point.

Schlagwörter

Stichwörter der Autor:innen

composition designhigh entropy alloymechanical alloyingspark plasma sinteringsuperalloy

Autor:innen und Institutionen

  • Institute of Powder Metallurgy and Advanced Ceramics, University of Science & Technology Beijing, Beijing 100083, China.
  • China Machinery Institute of Advanced Materials (Zhengzhou) Co., Ltd., Zhengzhou 450001, China.

ORCID-Profile: Xiaona Ren

Förderung

  • XiaoNa Ren
  • State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, China (2021Z-08)

Zitieren

APA

Chen, Z., Ren, X., Wang, P., Hu, J., & Ge, C. (2023). Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique. Materials, 16(5), 2082. https://doi.org/10.3390/ma16052082

Vancouver

Chen Z, Ren X, Wang P, Hu J, Ge C. Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique. Materials. 2023;16(5):2082. doi:10.3390/ma16052082

BibTeX
@article{Chen2023,
  author = {Chen, Zhipei and Ren, Xiaona and Wang, Peng and Hu, Jiangxiong and Ge, Changchun},
  title = {Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {2082},
  doi = {10.3390/ma16052082}
}
Kostenlos starten →