EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash

Celina Ziejewska iD, Agnieszka Grela, Marek Hebda iD

Materials · 01.03.2023 · 16 (5) · 2044

DOI: 10.3390/ma16052044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.03.2023. Verfasst von Celina Ziejewska und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 101 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Knowledge Education Development Operational Program 2014-2020, POLI DOCTUS project: “ROAD TO EXCELLENCE—a comprehensive university support programme” implemented under the Operational Programme Knowledge Education Developm…, European Social Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to protect the environment and counteract climate change, it is necessary to take any actions that enable a reduction in CO2 emissions. One of the key areas is research focused on developing alternative sustainable materials for construction to reduce the global demand for cement. This work presents the properties of foamed geopolymers with the addition of waste glass as well as determined the optimal size and amount of waste glass for improving the mechanical and physical features of the produced composites. Several geopolymer mixtures were fabricated by replacing coal fly ash with 0%, 10%, 20%, and 30% of waste glass by weight. Moreover, the effect of using different particle size ranges of the addition (0.1–1200 µm; 200–1200 µm; 100–250 µm; 63–120 µm; 40–63 µm; 0.1–40 µm) in the geopolymer matrix was examined. Based on the results, it was found that the application of 20–30% of waste glass with a particle size range of 0.1–1200 µm and a mean diameter of 550 µm resulted in approximately 80% higher compressive strength in comparison to unmodified material. Moreover, the samples produced using the smallest fraction (0.1–40 µm) of waste glass in the amount of 30% reached the highest specific surface area (43.711 m2/g), maximum porosity (69%), and density of 0.6 g/cm3.

Schlagwörter

Stichwörter der Autor:innen

compressive strengthgeopolymerleachabilityparticle sizewaste glass

Autor:innen und Institutionen

  • Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland.
  • Faculty of Environmental and Power Engineering, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland.

ORCID-Profile: Celina Ziejewska, Marek Hebda

Förderung

  • Knowledge Education Development Operational Program 2014-2020
  • POLI DOCTUS project: “ROAD TO EXCELLENCE—a comprehensive university support programme” implemented under the Operational Programme Knowledge Education Developm…
  • European Social Fund

Zitieren

APA

Ziejewska, C., Grela, A., & Hebda, M. (2023). Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash. Materials, 16(5), 2044. https://doi.org/10.3390/ma16052044

Vancouver

Ziejewska C, Grela A, Hebda M. Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash. Materials. 2023;16(5):2044. doi:10.3390/ma16052044

BibTeX
@article{Ziejewska2023,
  author = {Ziejewska, Celina and Grela, Agnieszka and Hebda, Marek},
  title = {Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {2044},
  doi = {10.3390/ma16052044}
}
Kostenlos starten →