EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading

Ali Reza Torabi iD, Moslem Mirzavand iD, Behnam Saboori iD, Sergio Cicero iD

Materials · 21.02.2023 · 16 (5) · 1757

DOI: 10.3390/ma16051757 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.02.2023. Verfasst von Ali Reza Torabi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Fracture Research Laboratory, Faculty of New Sciences and Technologies, University of Tehran, Tehran 14395-1561, Iran. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this study is to predict the load-bearing capacity (LBC) of fracture specimens containing V-notched friction-stir welded (FSWed) joints of AA7075-Cu and AA7075-AA6061 materials and subjected to mode I loading conditions. Due to the resulting elastic-plastic behavior and the corresponding development of significant plastic deformations, the fracture analysis of the FSWed alloys requires elastic-plastic fracture criteria, which are complex and time-consuming. Thus, in this study, the equivalent material concept (EMC) is applied, equating the actual AA7075-AA6061 and AA7075-Cu materials to equivalent virtual brittle materials. Then, two brittle fracture criteria, the maximum tangential stress (MTS) and mean stress (MS), are utilized to estimate the LBC of the V-notched FSWed parts. The comparison between the experimental results and the theoretical predictions reveals that both fracture criteria, in combination with EMC, can accurately predict the LBC in the analyzed components.

Schlagwörter

Stichwörter der Autor:innen

V-notchductile fractureequivalent material conceptfriction-stir weldingmaximum tangential stress criterionmean stress criterion

Autor:innen und Institutionen

  • Fracture Research Laboratory, Faculty of New Sciences and Technologies, University of Tehran, Tehran 14395-1561, Iran.
  • Center of Excellence in Experimental Solid Mechanics and Dynamics, Fatigue and Fracture Research Laboratory, School of Mechanical Engineering, Iran University of Science and Technology, Tehran 16846, Iran.
  • Laboratorio de la División de Ciencia e Ingeniería de los Materiales (LADICIM), Departamento de Ciencia e Ingeniería del Terreno y de los Materiales, Universidad de Cantabria, 39005 Santander, Spain.

ORCID-Profile: Ali Reza Torabi, Moslem Mirzavand, Behnam Saboori, Sergio Cicero

Zitieren

APA

Torabi, A. R., Mirzavand, M., Saboori, B., & Cicero, S. (2023). Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading. Materials, 16(5), 1757. https://doi.org/10.3390/ma16051757

Vancouver

Torabi AR, Mirzavand M, Saboori B, Cicero S. Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading. Materials. 2023;16(5):1757. doi:10.3390/ma16051757

BibTeX
@article{Torabi2023,
  author = {Torabi, Ali Reza and Mirzavand, Moslem and Saboori, Behnam and Cicero, Sergio},
  title = {Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {1757},
  doi = {10.3390/ma16051757}
}
Kostenlos starten →