EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy

Ying Wang, Dong Li, Junsheng Yang, Junsong Jin, Mao Zhang iD, Xinyun Wang, Bin Li, Zhigang Hu, Pan Gong iD

Materials · 18.02.2023 · 16 (4) · 1714

DOI: 10.3390/ma16041714 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.02.2023. Verfasst von Ying Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 430000, China. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Hubei Natural Science Foundation youth project, Pilot research base of intelligent equipment for processing agricultural products.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect and mechanism of grain sizes on the tribological behavior of CoCrFeMnNi high entropy alloy (HEA) were studied by friction experiments and wear morphology analysis. Under normal low load and low sliding speed, the primary wear mechanism of the HEA samples is adhesive wear. With the increase in sliding speed, the wear mechanisms of the samples are adhesive wear and oxidation wear. The oxide layer formed under the action of friction heat of the coarse grain (CG) sample is easy to break due to the softening of the CG. With the increase of normal load and sliding speed, the wear mechanisms of the HEA samples are mainly adhesive wear, oxidation wear, and plastic deformation. The oxide layer of CG sample has many cracks, and the worn surface also has plastic deformation, which leads to the increase of friction coefficient and specific wear rate and the decrease of wear resistance. Therefore, the fine grain size HEA sample has better wear resistance than the CG sample due to its high surface strength.

Schlagwörter

Stichwörter der Autor:innen

grain sizehigh entropy alloytribological behaviorwear mechanism

Autor:innen und Institutionen

  • School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 430000, China.
  • State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, 1037 Luoyu Road, Wuhan 430074, China.

ORCID-Profile: Mao Zhang, Pan Gong

Förderung

  • National Natural Science Foundation of China
  • Hubei Natural Science Foundation youth project
  • Pilot research base of intelligent equipment for processing agricultural products
  • Natural Science Foundation of China
  • Hubei Chen Xiaoping Science and Technology Development Foundation

Zitieren

APA

Wang, Y., Li, D., Yang, J., Jin, J., Zhang, M., Wang, X., Li, B., Hu, Z., & Gong, P. (2023). Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy. Materials, 16(4), 1714. https://doi.org/10.3390/ma16041714

Vancouver

Wang Y, Li D, Yang J, Jin J, Zhang M, Wang X, et al. Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy. Materials. 2023;16(4):1714. doi:10.3390/ma16041714

BibTeX
@article{Wang2023,
  author = {Wang, Ying and Li, Dong and Yang, Junsheng and Jin, Junsong and Zhang, Mao and Wang, Xinyun and Li, Bin and Hu, Zhigang and Gong, Pan},
  title = {Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1714},
  doi = {10.3390/ma16041714}
}
Kostenlos starten →