EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructures and Properties of NbC-Reinforced Ni-Based Coatings Synthesized In Situ by Ultrasonic Vibration-Assisted Laser Cladding

Guofu Lian, Kun Yue, Jiayi Zeng, Meiyan Feng, Ruqing Lan, Linghua Kong

Materials · 17.02.2023 · 16 (4) · 1704

DOI: 10.3390/ma16041704 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.02.2023. Verfasst von Guofu Lian und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Linghua Kong, Guofu Lian, Science and Technology Innovation Key Project of Fujian Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper aims to explore the mechanism of an ultrasonic applied field on the microstructures and properties of coatings, and clarify the evolution of the molten pool under different ultrasonic frequencies. The Taguchi experimental design method was adopted in this paper. NbC-reinforced Ni-based coatings were in situ synthesized by laser cladding to investigate the effects of ultrasonic vibration process parameters on the microstructure, pore area, microhardness, and wear resistance of the cladding layer. The results show that the pore area decreases first and then increases as ultrasonic power increases from 600 to 900 W and ultrasonic frequency from 23 to 40 kHz. On the contrary, the hardness and wear resistance increase at first and then decrease. The pore area is minimized at 800 W ultrasonic power and 32 kHz ultrasonic frequency, and the hardness is maximized at 600 W ultrasonic power and 40 kHz ultrasonic frequency. Meanwhile, the highest wear resistance can be obtained when ultrasonic power is 700 W and ultrasonic frequency is 32 kHz. Based on the phase structure analysis, the cladding layer mainly consists of FeNi3, NbC, B4C, and CrB2. Ultrasonic vibration will not change the phase composition of the layer. Combined with the varying G/R value and cooling rate, the reasons for the change in grain morphology in different areas were analyzed to reveal the evolution mechanism of the molten pool under the influence of ultrasound.

Schlagwörter

Stichwörter der Autor:innen

friction coefficienthardnesslaser claddingmicrostructureultrasonic vibration

Autor:innen und Institutionen

  • School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China.
  • Fujian Key Laboratory of Intelligent Processing Technology and Equipment, Fujian Institute of Engineering, Fuzhou 350118, China.

Förderung

  • Linghua Kong
  • Guofu Lian
  • Science and Technology Innovation Key Project of Fujian Province
  • Natural Science Foundation of Fujian Province

Zitieren

APA

Lian, G., Yue, K., Zeng, J., Feng, M., Lan, R., & Kong, L. (2023). Microstructures and Properties of NbC-Reinforced Ni-Based Coatings Synthesized In Situ by Ultrasonic Vibration-Assisted Laser Cladding. Materials, 16(4), 1704. https://doi.org/10.3390/ma16041704

Vancouver

Lian G, Yue K, Zeng J, Feng M, Lan R, Kong L. Microstructures and Properties of NbC-Reinforced Ni-Based Coatings Synthesized In Situ by Ultrasonic Vibration-Assisted Laser Cladding. Materials. 2023;16(4):1704. doi:10.3390/ma16041704

BibTeX
@article{Lian2023,
  author = {Lian, Guofu and Yue, Kun and Zeng, Jiayi and Feng, Meiyan and Lan, Ruqing and Kong, Linghua},
  title = {Microstructures and Properties of NbC-Reinforced Ni-Based Coatings Synthesized In Situ by Ultrasonic Vibration-Assisted Laser Cladding},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1704},
  doi = {10.3390/ma16041704}
}
Kostenlos starten →