Understanding of Excellent Mechanical Performance of 304L Manufactured by Optimal Selective Laser Melting (SLM) Conditions
Materials · 16.02.2023 · 16 (4) · 1661
DOI: 10.3390/ma16041661 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2023. Verfasst von Yaxin Ma und 6 weiteren Autor:innen. Beteiligte Einrichtung: Central Iron & Steel Research Institute, NCS Testing Technology Co., Ltd., Beijing 100081, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lixia Yang, Dongling Li, Hong Zhang.
Abstract (Originalsprache)
The optimal SLM conditions of 304L stainless steel were obtained by single factor and orthogonal tests. Results indicated that the optimal hardness (75 HRB) and Relative Density (RD 99.24%) could be obtained when the laser output power was 190 W, the scanning distance was 0.09 mm and the scanning speed was 800 mm/s. The microstructure of fish scales was uniform and compact with a few pores in the optimal sample. The fine particles were randomly distributed near the edge of the molten pool, and some preferred granular columnar crystal structures were formed. Abundant entanglement dislocations were observed between cell structures, forming dislocation clusters. Spherical nano-precipitates, rich in Si, Mn, and O, were also observed near cell structures. The mechanical properties of the specimens were highly anisotropic, and there were obvious necking and ductility at the tensile fracture.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Central Iron & Steel Research Institute, NCS Testing Technology Co., Ltd., Beijing 100081, China.
- Chengdu Aeronautic Polytechnic, Chengdu 610100, China.
- Failure Mechanics and Engineering Disaster Prevention and Mitigation Key Laboratory of Sichuan Province, College of Architecture and Environment, Sichuan University, Chengdu 610065, China.
- School of Materials Science and Engineering, Chongqing University of Technology, Chongqing 401320, China.
ORCID-Profile: Yaxin Ma, Hong Zhang
Förderung
- Lixia Yang
- Dongling Li
- Hong Zhang
- National Key Research and Development Program of China
- National Natural Science Research Funds of China
- Natural Science Research Funds of Sichuan Province, China
Zitieren
APA
Ma, Y., Gao, Y., Zhao, L., Zhang, H., Li, D., Yang, L., & Yu, C. (2023). Understanding of Excellent Mechanical Performance of 304L Manufactured by Optimal Selective Laser Melting (SLM) Conditions. Materials, 16(4), 1661. https://doi.org/10.3390/ma16041661
Vancouver
Ma Y, Gao Y, Zhao L, Zhang H, Li D, Yang L, et al. Understanding of Excellent Mechanical Performance of 304L Manufactured by Optimal Selective Laser Melting (SLM) Conditions. Materials. 2023;16(4):1661. doi:10.3390/ma16041661
BibTeX
@article{Ma2023,
author = {Ma, Yaxin and Gao, Yifei and Zhao, Lei and Zhang, Hong and Li, Dongling and Yang, Lixia and Yu, Chuntang},
title = {Understanding of Excellent Mechanical Performance of 304L Manufactured by Optimal Selective Laser Melting (SLM) Conditions},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1661},
doi = {10.3390/ma16041661}
}
EUVIMED