Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment
Materials · 16.02.2023 · 16 (4) · 1652
DOI: 10.3390/ma16041652 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2023. Verfasst von Zhicheng Huang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Jingdezhen Ceramic University, Jingdezhen 333001, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of China, Science and Technology Projects of Jiangxi Education Department of China.
Abstract (Originalsprache)
An enhanced lightness and thinness is the inevitable trend of modern industrial production, which will also lead to prominent low-frequency vibration problems in the associated structure. To solve the vibration problem of thin plate structures in various engineering fields, the active constrained layer damping (ACLD) thin plate structure is taken as the research object to study vibration control. Based on the FEM method, energy method, and Hamilton principle, the dynamic model of an ACLD thin plate structure is derived, in which the Golla–Hughes–McTavish (GHM) model is used to characterize the damping characteristics of the viscoelastic layer, and the equivalent Rayleigh damping is used to characterize the damping characteristics of the base layer. The order of the model is reduced based on the high-precision physical condensation method and balance reduction method, and the model has good controllability and observability. An LQR controller is designed to actively control the ACLD sheet, and the controller parameters and piezoelectric sheet parameters are optimized. The results show that the finite element model established in this paper is accurate under different boundary conditions, and the model can still accurately and reliably describe the dynamic characteristics of the original system in the time and frequency domain after using the joint reduction method. Under different excitation and boundary conditions, LQR control can effectively suppress structural vibration. Considering the performance and cost balance, the most suitable control parameter for the system is: Q-matrix coefficient is between 1 × 104 and 1 × 105, the R-matrix coefficient is between 1 and 10, and the thickness of the piezoelectric plate is 0.5 mm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, Jingdezhen Ceramic University, Jingdezhen 333001, China.
- Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China.
ORCID-Profile: Zhicheng Huang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of China
- Science and Technology Projects of Jiangxi Education Department of China
Zitieren
APA
Huang, Z., Peng, H., Wang, X., & Chu, F. (2023). Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment. Materials, 16(4), 1652. https://doi.org/10.3390/ma16041652
Vancouver
Huang Z, Peng H, Wang X, Chu F. Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment. Materials. 2023;16(4):1652. doi:10.3390/ma16041652
BibTeX
@article{Huang2023,
author = {Huang, Zhicheng and Peng, Huanyou and Wang, Xingguo and Chu, Fulei},
title = {Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1652},
doi = {10.3390/ma16041652}
}
EUVIMED