Effect of Particle Size and Morphology of Siliceous Supplementary Cementitious Material on the Hydration and Autogenous Shrinkage of Blended Cement
Materials · 16.02.2023 · 16 (4) · 1638
DOI: 10.3390/ma16041638 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2023. Verfasst von Xiaochuan Xu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Project of National Natural Science Foundation of China, Science and Technology Plan Project of Shenyang, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Supplementary cementitious material (SCM) plays an important role in blended cement, and the effect of the particle size and morphology of siliceous supplementary cementitious material on hydration should not be ignored. In this study, 0.5 h and 1 h of wet grinding was applied to pretreat iron ore tailing powder (TP), and the divergence in pozzolanic behavior and morphology were investigated. Then, the treated TPs were used to replace the 30% cement contents in preparing blended cementitious paste, and the impact mechanism of morphology on performance was studied emphatically. M, the autogenous shrinkages of pastes were tested. Finally, hydration reaction kinetics was carried out to explore the hydration behavior, while X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to characterize the hydration product properties, respectively. Meanwhile, microscopy intrusion porosimetry (MIP) was also carried out to characterize the pore structures of hardened specimens. Results indicated that wet grinding has a dramatic effect on particle size and morphology, but hardly affects the phase assemblages and pozzolanic reactivity of TP, while the particle shape of TP changes from sub-circular to clavate and, finally, back to sub-circular. The results of hydration reaction kinetics, representing the morphology of particles, had a significant effect on hydration rate and total heat, and compared with the sub-circle one, the clavated particle could inhibit the hydration procedure. With the increasing grinding time, the compressive strength of cementitious paste was increased from 17.37% to 55.73%, and the micro-pore structure became denser; however, the autogenous shrinkage increased.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China.
- Science and Technology Innovation Center of Smart Water and Resource Environment, Northeastern University, Shenyang 110819, China.
- School of Mathematics and Physical Sciences, University College London, London WC1E 6BT, UK.
Förderung
- Special Project of National Natural Science Foundation of China
- Science and Technology Plan Project of Shenyang
- Fundamental Research Funds for the Central Universities
- National Science and Technology Planning Project
- Major Science and Technology Projects of Liaoning Province
- Leading talents in Talent Engineering
Zitieren
APA
Xu, X., Zhao, Y., Gu, X., Zhu, Z., Wang, F., & Zhang, Z. (2023). Effect of Particle Size and Morphology of Siliceous Supplementary Cementitious Material on the Hydration and Autogenous Shrinkage of Blended Cement. Materials, 16(4), 1638. https://doi.org/10.3390/ma16041638
Vancouver
Xu X, Zhao Y, Gu X, Zhu Z, Wang F, Zhang Z. Effect of Particle Size and Morphology of Siliceous Supplementary Cementitious Material on the Hydration and Autogenous Shrinkage of Blended Cement. Materials. 2023;16(4):1638. doi:10.3390/ma16041638
BibTeX
@article{Xu2023,
author = {Xu, Xiaochuan and Zhao, Yunqi and Gu, Xiaowei and Zhu, Zhenguo and Wang, Fengdan and Zhang, Zaolin},
title = {Effect of Particle Size and Morphology of Siliceous Supplementary Cementitious Material on the Hydration and Autogenous Shrinkage of Blended Cement},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1638},
doi = {10.3390/ma16041638}
}
EUVIMED