A Comparative Study of Different Poly (Lactic Acid) Bio-Composites Produced by Mechanical Alloying and Casting for Tribological Applications
Materials · 15.02.2023 · 16 (4) · 1608
DOI: 10.3390/ma16041608 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.02.2023. Verfasst von Anzum Al Abir und 1 weiteren Autor:innen. Beteiligte Einrichtung: CEMMPRE-Centre for Mechanical Engineering, Materials and Processes, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Portuguese Foundation for Science and Technology, European Commission.
Abstract (Originalsprache)
The aim of this study was to fabricate different self-lubricating poly (lactic acid)-based bio-composites reinforced with mono- and multi-fillers of carbon fibers, graphene nanoparticles, and a soft Sn-based brazing alloy (Sn89-Zn8-Bi3) using a two-step process consisting of mechanical alloying followed by casting. The results showed that the incorporation of the different fillers on the PLA surface by mechanical alloying was quite homogenous. The volume ratio between the PLA and the fillers was 1:0.02, respectively. The PLA sample reinforced with short carbon fibers and graphene nanoparticles presented the highest hardness (84.5 Shore D, corresponding to a 10% increase compared to PLA) and the lowest specific wear rate (1.5 × 10−4 mm3/N·m, one order of magnitude lower than PLA). With regard to the coefficient of friction, the lowest value was obtained for the sample reinforced with graphene (0.43, corresponding to a decrease of 12% compared to PLA).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CEMMPRE-Centre for Mechanical Engineering, Materials and Processes, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal.
ORCID-Profile: Anzum Al Abir, Bruno Trindade
Förderung
- Portuguese Foundation for Science and Technology
- European Commission
Zitieren
APA
Abir, A. A., & Trindade, B. (2023). A Comparative Study of Different Poly (Lactic Acid) Bio-Composites Produced by Mechanical Alloying and Casting for Tribological Applications. Materials, 16(4), 1608. https://doi.org/10.3390/ma16041608
Vancouver
Abir AA, Trindade B. A Comparative Study of Different Poly (Lactic Acid) Bio-Composites Produced by Mechanical Alloying and Casting for Tribological Applications. Materials. 2023;16(4):1608. doi:10.3390/ma16041608
BibTeX
@article{Abir2023,
author = {Abir, Anzum Al and Trindade, Bruno},
title = {A Comparative Study of Different Poly (Lactic Acid) Bio-Composites Produced by Mechanical Alloying and Casting for Tribological Applications},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1608},
doi = {10.3390/ma16041608}
}
EUVIMED