Kinetics of Carbon Enrichment in Austenite during Partitioning Stage Studied via In-Situ Synchrotron XRD
Materials · 13.02.2023 · 16 (4) · 1557
DOI: 10.3390/ma16041557 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.02.2023. Verfasst von Farnoosh Forouzan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Sciences and Mathematics, Luleå University of Technology, SE-97187 Luleå, Sweden. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kempe Foundation, Sweden.
Abstract (Originalsprache)
The present study reveals the microstructural evolution and corresponding mechanisms occurring during different stages of quenching and partitioning (Q&P) conducted on 0.6C-1.5Si steel using in-situ High Energy X-Ray Diffraction (HEXRD) and high-resolution dilatometry methods. The results support that the symmetry of ferrite is not cubic when first formed since it is fully supersaturated with carbon at the early stages of partitioning. Moreover, by increasing partitioning temperature, the dominant carbon source for austenite enrichment changes from ongoing bainitic ferrite transformation during the partitioning stage to initial martensite formed in the quenching stage. At low partitioning temperatures, a bimodal distribution of low- and high-carbon austenite, 0.6 and 1.9 wt.% carbon, is detected. At higher temperatures, a better distribution of carbon occurs, approaching full homogenization. An initial martensite content of around 11.5 wt.% after partitioning at 280 °C via bainitic ferrite transformation results in higher carbon enrichment of austenite and increased retained austenite amount by approximately 4% in comparison with partitioning at 500 °C. In comparison with austempering heat treatment with no prior martensite, the presence of initial martensite in the Q&P microstructure accelerates the subsequent low-temperature bainitic transformation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering Sciences and Mathematics, Luleå University of Technology, SE-97187 Luleå, Sweden.
- Materials and Mechanical Engineering, University of Oulu, 90014 Oulu, Finland.
- Helmholtz-Zentrum Hereon, Institute of Materials Physics, Max-Planck-Straße 1, 21502 Geesthacht, Germany.
ORCID-Profile: Farnoosh Forouzan, Roohallah Surki Aliabad, Ali Hedayati, Esa Vuorinen
Förderung
- Kempe Foundation, Sweden
Zitieren
APA
Forouzan, F., Surki Aliabad, R., Hedayati, A., Hosseini, N., Maawad, E., Blasco, N., & Vuorinen, E. (2023). Kinetics of Carbon Enrichment in Austenite during Partitioning Stage Studied via In-Situ Synchrotron XRD. Materials, 16(4), 1557. https://doi.org/10.3390/ma16041557
Vancouver
Forouzan F, Surki Aliabad R, Hedayati A, Hosseini N, Maawad E, Blasco N, et al. Kinetics of Carbon Enrichment in Austenite during Partitioning Stage Studied via In-Situ Synchrotron XRD. Materials. 2023;16(4):1557. doi:10.3390/ma16041557
BibTeX
@article{Forouzan2023,
author = {Forouzan, Farnoosh and Surki Aliabad, Roohallah and Hedayati, Ali and Hosseini, Nazanin and Maawad, Emad and Blasco, Núria and Vuorinen, Esa},
title = {Kinetics of Carbon Enrichment in Austenite during Partitioning Stage Studied via In-Situ Synchrotron XRD},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1557},
doi = {10.3390/ma16041557}
}
EUVIMED