Mechanical Properties of Titanium/Nano-Fluorapatite Parts Produced by Laser Powder Bed Fusion
Materials · 10.02.2023 · 16 (4) · 1502
DOI: 10.3390/ma16041502 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.02.2023. Verfasst von Po-Kuan Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, Chi Mei Medical Center, No. 901 Zhonghua Rd., Yongkang District, Tainan 710, Taiwan. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of the People's Republic of China, Chi Mei Foundation Hospital, Republic of China (Taiwan), National Science and Technology Council (Taiwan).
Abstract (Originalsprache)
Laser powder bed fusion (L-PBF) has attracted great interest in recent years due to its ability to produce intricate parts beyond the capabilities of traditional manufacturing processes. L-PBF processed biomedical implants are usually made of commercial pure titanium (CP-Ti) or its alloys. However, both alloys are naturally bio-inert, and thus reduce the formation of apatite as implants are put into the human body. Accordingly, in an attempt to improve the bioactivity of the materials used for making orthopedic implants, the present study decomposed fluorapatite material (FA, (Ca10(PO4)6F2)) into the form of nano-powder and mixed this powder with CP-Ti powder in two different ratios (99%Ti + 1%FA (Ti-1%FA) and 98%Ti + 2%FA (Ti-2%FA)) to form powder material for the L-PBF process. Experimental trials were conducted to establish the optimal processing conditions (i.e., laser power, scanning speed and hatching space) of the L-PBF process for the two powder mixtures and the original CP-Ti powder with no FA addition. The optimal parameters were then used to produce tensile test specimens in order to evaluate the mechanical properties of the different samples. The hardness of the various samples was also examined by micro-Vickers hardness tests. The tensile strength of the Ti-1%FA sample (850 MPa) was found to be far higher than that of the CP-Ti sample (513 MPa). Furthermore, the yield strength of the Ti-1%FA sample (785 MPa) was also much higher than that of the CP-Ti sample (472 MPa). However, the elongation of the Ti-1%FA sample (6.27 %) was significantly lower than that of the CP-Ti sample (16.17%). Finally, the hardness values of the Ti-1%FA and Ti-2%FA samples were around 63.8% and 109.4%, respectively, higher than that of the CP-Ti sample.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Orthopaedics, Chi Mei Medical Center, No. 901 Zhonghua Rd., Yongkang District, Tainan 710, Taiwan.
- Department of Mechanical Engineering, Southern Taiwan University of Science and Technology, Tainan 710, Taiwan.
ORCID-Profile: Po-Kuan Wu, Tsung-Yuan Kuo
Förderung
- Ministry of Science and Technology of the People's Republic of China
- Chi Mei Foundation Hospital, Republic of China (Taiwan)
- National Science and Technology Council (Taiwan)
- Chi Mei Medical Center, (Taiwan)
Zitieren
APA
Wu, P. K., Lin, W. T., Lin, J. W., Tran, H. C., Kuo, T. Y., Chien, C. S., Vo, V. L., & Lin, R. L. (2023). Mechanical Properties of Titanium/Nano-Fluorapatite Parts Produced by Laser Powder Bed Fusion. Materials, 16(4), 1502. https://doi.org/10.3390/ma16041502
Vancouver
Wu PK, Lin WT, Lin JW, Tran HC, Kuo TY, Chien CS, et al. Mechanical Properties of Titanium/Nano-Fluorapatite Parts Produced by Laser Powder Bed Fusion. Materials. 2023;16(4):1502. doi:10.3390/ma16041502
BibTeX
@article{Wu2023,
author = {Wu, Po-Kuan and Lin, Wei-Ting and Lin, Jia-Wei and Tran, Hong-Chuong and Kuo, Tsung-Yuan and Chien, Chi-Sheng and Vo, Vi-Long and Lin, Ru-Li},
title = {Mechanical Properties of Titanium/Nano-Fluorapatite Parts Produced by Laser Powder Bed Fusion},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1502},
doi = {10.3390/ma16041502}
}
EUVIMED