EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Characterization and Constitutive Modeling of Nano-Stabilized Soil under Uniaxial Compression

Xingchen Zhang iD, Jianen Gao iD, Minmin Qiang, Haochen Zhang, Xinghua Li, Shaobo Long, Zhe Gao, Henghui Fan

Materials · 10.02.2023 · 16 (4) · 1488

DOI: 10.3390/ma16041488 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.02.2023. Verfasst von Xingchen Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Soil and Water Conservation, Northwest Agriculture and Forestry University, Xianyang 712100, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, the Key Research and Development Project of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The stress–strain constitutive model under uniaxial compression is a basic element and important characterization method for determining physical and mechanical properties in cement-based materials research. In this study, a stress–strain constitutive model under uniaxial compression was established, which was based on a new nano-stabilized soil (NSS) through typical mechanical tests and constitutive relationship research. The results indicate that the unconfined compressive strength (UCS) of the nano-stabilized soil was enhanced with the increase in curing period and nano-stabilizer dosage, and that the strength growth rate reaches the maximum at a 12% dosage in the tested samples. The UCS of NSS under a 12% dosage is about 10~15% higher than that of ordinary stabilized soil (SS) without nano doping, and 25~40% higher compared with grade 42.5 cement-soil. The established constitutive model could accurately describe the linear-elastic and elastic-plastic deformation characteristics of NSS under uniaxial compression, which will be conducive to revealing the curve variation law of the stress–strain process. The research results could provide scientific support for the theoretical innovation and engineering application of green environmental protection materials.

Schlagwörter

Stichwörter der Autor:innen

constitutive modelnano-stabilized soilstress–strain curveunconfined compressive strength

Autor:innen und Institutionen

  • Institute of Soil and Water Conservation, Northwest Agriculture and Forestry University, Xianyang 712100, China.
  • Northwest Engineering Corporation Limited, Power China, Xi'an 710065, China.
  • College of Civil Engineering, Yan'an University, Yan'an 716000, China.
  • College of Water Resources and Architectural Engineering, Northwest Agriculture and Forestry University, Xianyang 712100, China.

ORCID-Profile: Xingchen Zhang, Jianen Gao

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • the Key Research and Development Project of Shaanxi Province
  • Knowledge Innovation Program of the Chinese Academy of Sciences
  • Platform support Project of Northwest Engineering Corporation Limited, Power China
  • Key Research and Development Project of Shaanxi Province

Zitieren

APA

Zhang, X., Gao, J., Qiang, M., Zhang, H., Li, X., Long, S., Gao, Z., & Fan, H. (2023). Mechanical Characterization and Constitutive Modeling of Nano-Stabilized Soil under Uniaxial Compression. Materials, 16(4), 1488. https://doi.org/10.3390/ma16041488

Vancouver

Zhang X, Gao J, Qiang M, Zhang H, Li X, Long S, et al. Mechanical Characterization and Constitutive Modeling of Nano-Stabilized Soil under Uniaxial Compression. Materials. 2023;16(4):1488. doi:10.3390/ma16041488

BibTeX
@article{Zhang2023,
  author = {Zhang, Xingchen and Gao, Jianen and Qiang, Minmin and Zhang, Haochen and Li, Xinghua and Long, Shaobo and Gao, Zhe and Fan, Henghui},
  title = {Mechanical Characterization and Constitutive Modeling of Nano-Stabilized Soil under Uniaxial Compression},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1488},
  doi = {10.3390/ma16041488}
}
Kostenlos starten →