EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compressive Properties and Energy Absorption Behavior of 316L Steel Foam Prepared by Space Holder Technique

Guangyu Hu, Guili Xu, Qiang Gao, Zhanhao Feng, Peng Huang iD, Guoyin Zu

Materials · 08.02.2023 · 16 (4) · 1419

DOI: 10.3390/ma16041419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.02.2023. Verfasst von Guangyu Hu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Liao Ning Revitalization Talents Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of porosity and pore size on the quasi-static compression properties and energy absorption characteristics of the steel foam was investigated in this paper. The 316L steel foams were prepared through powder metallurgy using urea as the space holder. The macrostructure of steel foam and microstructure of the pore walls were characterized, and the quasi-static compression experiments were conducted on the specimens in the axial direction at a strain rate of 10−3 s−1. The results show that the increase in porosity decreases the yield strength and plastic modulus of the steel foam but increases the densification strain of the steel foam. The yield strength of the steel foam decreases significantly when the pore size is 2.37 mm. However, the pore size has little effect on the plastic modulus. Moreover, the energy absorption per volume of the steel foam decreases with increasing porosity at the same strain. The effect of porosity on energy absorption efficiency is greater than that of pore size.

Schlagwörter

Stichwörter der Autor:innen

316L stainless steelenergy absorptionpore sizeporosityquasi-static compression propertiesspace holder techniquesteel foam

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China.

ORCID-Profile: Peng Huang

Förderung

  • National Natural Science Foundation of China
  • Liao Ning Revitalization Talents Program

Zitieren

APA

Hu, G., Xu, G., Gao, Q., Feng, Z., Huang, P., & Zu, G. (2023). Compressive Properties and Energy Absorption Behavior of 316L Steel Foam Prepared by Space Holder Technique. Materials, 16(4), 1419. https://doi.org/10.3390/ma16041419

Vancouver

Hu G, Xu G, Gao Q, Feng Z, Huang P, Zu G. Compressive Properties and Energy Absorption Behavior of 316L Steel Foam Prepared by Space Holder Technique. Materials. 2023;16(4):1419. doi:10.3390/ma16041419

BibTeX
@article{Hu2023,
  author = {Hu, Guangyu and Xu, Guili and Gao, Qiang and Feng, Zhanhao and Huang, Peng and Zu, Guoyin},
  title = {Compressive Properties and Energy Absorption Behavior of 316L Steel Foam Prepared by Space Holder Technique},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1419},
  doi = {10.3390/ma16041419}
}
Kostenlos starten →