Effect of Post-Weld Heat Treatment on Microstructure and Hardness of Laser Beam Welded 17-4 PH Stainless Steel
Materials · 04.02.2023 · 16 (4) · 1334
DOI: 10.3390/ma16041334 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.02.2023. Verfasst von Lechosław Tuz und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Engineering and Industrial Computer Science, AGH University of Science and Technology, 30-059 Krakow, Poland. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Ministry of Science and Higher Education.
Abstract (Originalsprache)
This article presents the results of research on the development of the technology of laser beam butt welding of 17-4 PH stainless steel sheets and the technology of post-weld heat treatment (PWHT). The developed technology allows for favorable conditions to be obtained and for the appropriate microstructure and hardness to exist in the weld area. Moreover, it enables the fulfillment of a number of specific requirements beyond the possibilities of manual welding and other methods. The tests performed include the analysis of the microstructure with the use of light microscopy (LM) for the materials after welding and PWHT. The applied PWHT showed changes in the microstructure and mechanical properties. In all weld areas the martensitic microstructure was observed. The homogeneity of the microstructure in the area of the welded joint after PWTH was revealed. In the as-welded condition and after the PWHT with aging at 481 °C, the hardness was 440 HV5, but after aging at 621 °C, it decreased to 330–340 HV5.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Materials Engineering and Industrial Computer Science, AGH University of Science and Technology, 30-059 Krakow, Poland.
- Łukasiewicz Research Network-Institute of Welding, 44-100 Gliwice, Poland.
ORCID-Profile: Lechosław Tuz, Sebastian Stano
Förderung
- Polish Ministry of Science and Higher Education
Zitieren
APA
Tuz, L., Sokołowski, Ł., & Stano, S. (2023). Effect of Post-Weld Heat Treatment on Microstructure and Hardness of Laser Beam Welded 17-4 PH Stainless Steel. Materials, 16(4), 1334. https://doi.org/10.3390/ma16041334
Vancouver
Tuz L, Sokołowski Ł, Stano S. Effect of Post-Weld Heat Treatment on Microstructure and Hardness of Laser Beam Welded 17-4 PH Stainless Steel. Materials. 2023;16(4):1334. doi:10.3390/ma16041334
BibTeX
@article{Tuz2023,
author = {Tuz, Lechosław and Sokołowski, Łukasz and Stano, Sebastian},
title = {Effect of Post-Weld Heat Treatment on Microstructure and Hardness of Laser Beam Welded 17-4 PH Stainless Steel},
journal = {Materials},
year = {2023},
volume = {16},
number = {4},
pages = {1334},
doi = {10.3390/ma16041334}
}
EUVIMED