EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Soft Magnetic Properties of FeSiAl Magnetic Powder Cores by Compounding with Different Content of Epoxy Resin

Zhengqu Zhu, Jiaqi Liu, Huan Zhao, Jing Pang, Pu Wang, Jiaquan Zhang

Materials · 02.02.2023 · 16 (3) · 1270

DOI: 10.3390/ma16031270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.02.2023. Verfasst von Zhengqu Zhu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key research and development project of Shandong province in China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

FeSiAl is a commonly used soft magnetic material because of its high resistivity, low core loss, and low cost. In order to systematically study the effect of epoxy resin (EP) on the insulated coating and pressing effect of FeSiAl magnetic powders, six groups of composite powders and their corresponding soft magnetic powder cores (SMPCs) were prepared by changing the content of EP, and the soft magnetic properties of the powders and SMPCs were characterized. The results showed that FeSiAl powders exhibited good sphericity and morphology. The Ms of FeSiAl/EP composite powders was between 117.4–124.8 emu·g−1 after adding (0.3, 0.5, 0.7, 1, 1.5, and 2 wt. %) EP. The permeability μe of SMPCs increased first and then decreased with the increase in EP content. Among them, when the EP content was 1 wt. %, the corresponding SMPCs had the highest μe and excellent DC bias performance (63%, 100 Oe). In the whole test frequency range (50~1000 kHz), SMPCs with 1 wt. % EP content had the lowest core loss (1733.9 mW·cm−3 at 20 mT and 1000 kHz). After that, the loss separation study in the low-frequency range (50~250 kHz) was conducted, and the hysteresis loss and eddy current loss of SMPCs with 1 wt. % EP content were also the lowest. In addition, SMPCs also exhibited the best overall performance when the EP content was 1 wt. %. The results of this study can guide the design of composite insulation coating schemes and promote the development of soft magnetic materials for medium and high frequency applications.

Schlagwörter

Stichwörter der Autor:innen

FeSiAl magnetic powder coresepoxy resinloss separatesoft magnetic properties

Autor:innen und Institutionen

  • School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China.
  • Qingdao Yunlu Advanced Materials Technology Co., Ltd., Qingdao 266232, China.

Förderung

  • Key research and development project of Shandong province in China

Zitieren

APA

Zhu, Z., Liu, J., Zhao, H., Pang, J., Wang, P., & Zhang, J. (2023). Study of the Soft Magnetic Properties of FeSiAl Magnetic Powder Cores by Compounding with Different Content of Epoxy Resin. Materials, 16(3), 1270. https://doi.org/10.3390/ma16031270

Vancouver

Zhu Z, Liu J, Zhao H, Pang J, Wang P, Zhang J. Study of the Soft Magnetic Properties of FeSiAl Magnetic Powder Cores by Compounding with Different Content of Epoxy Resin. Materials. 2023;16(3):1270. doi:10.3390/ma16031270

BibTeX
@article{Zhu2023,
  author = {Zhu, Zhengqu and Liu, Jiaqi and Zhao, Huan and Pang, Jing and Wang, Pu and Zhang, Jiaquan},
  title = {Study of the Soft Magnetic Properties of FeSiAl Magnetic Powder Cores by Compounding with Different Content of Epoxy Resin},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {1270},
  doi = {10.3390/ma16031270}
}
Kostenlos starten →