EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Stability of Dross Particles in Hot-Dip Zn-55wt%Al-1.6wt%Si Galvanizing Bath

Dongdong Qu iD, Matthew Gear, Qinfen Gu, Nega Setargew, Wayne Renshaw, Stuart McDonald, David StJohn iD, Kazuhiro Nogita iD

Materials · 31.01.2023 · 16 (3) · 1211

DOI: 10.3390/ma16031211 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.01.2023. Verfasst von Dongdong Qu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Mining Engineering, The University of Queensland, Brisbane 4072, Australia. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, Australian Synchrotron, ARC Research Hub for Australian Steel Manufacturing Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dross in a Zn-55wt%Al-1.6wt%Si metal coating bath is a mixture of bath metal and the quaternary intermetallic phase τ5c-Al20Fe5Si2(+Zn). Understanding the properties and formation of dross in a hot-dip Al-Zn galvanizing bath at the processing temperature (~600 °C) is critical for improving the production quality of steel sheet coating. However, dross analysis is usually conducted at room temperature with dross samples taken from the hot-dip bath and it is not known how representative these samples are of the phase(s) existing at high temperature. Using in-situ synchrotron X-ray diffraction (XRD), the crystal lattice and the coefficient of thermal expansion (CTE) of the intermetallic phase have been determined in the temperature range of 30 °C to 660 °C. Phase formation and phase stability of the intermetallic phase in the dross powder have been determined, providing fundamental knowledge for optimizing the production and quality of steel sheet coating.

Schlagwörter

Stichwörter der Autor:innen

hot-dip galvanizing drossphase stabilitysynchrotron X-ray diffractionτ5c-Al20Fe5Si2(+Zn)

Autor:innen und Institutionen

  • School of Mechanical and Mining Engineering, The University of Queensland, Brisbane 4072, Australia.
  • ARC Research Hub for Australian Steel Manufacturing, Wollongong 2522, Australia.
  • Australian Synchrotron, Australian Nuclear Science and Technology Organisation (ANSTO), Clayton, Melbourne 3168, Australia.
  • Product Innovation and Technology, BlueScope Ltd., Port Kembla, Wollongong 2505, Australia.

ORCID-Profile: Dongdong Qu, David StJohn, Kazuhiro Nogita

Förderung

  • Australian Research Council
  • Australian Synchrotron
  • ARC Research Hub for Australian Steel Manufacturing Project
  • ARC Linkage Project
  • X-ray Powder Diffraction Beamline at the Australian Synchrotron, part of ANSTO

Zitieren

APA

Qu, D., Gear, M., Gu, Q., Setargew, N., Renshaw, W., McDonald, S., StJohn, D., & Nogita, K. (2023). Phase Stability of Dross Particles in Hot-Dip Zn-55wt%Al-1.6wt%Si Galvanizing Bath. Materials, 16(3), 1211. https://doi.org/10.3390/ma16031211

Vancouver

Qu D, Gear M, Gu Q, Setargew N, Renshaw W, McDonald S, et al. Phase Stability of Dross Particles in Hot-Dip Zn-55wt%Al-1.6wt%Si Galvanizing Bath. Materials. 2023;16(3):1211. doi:10.3390/ma16031211

BibTeX
@article{Qu2023,
  author = {Qu, Dongdong and Gear, Matthew and Gu, Qinfen and Setargew, Nega and Renshaw, Wayne and McDonald, Stuart and StJohn, David and Nogita, Kazuhiro},
  title = {Phase Stability of Dross Particles in Hot-Dip Zn-55wt%Al-1.6wt%Si Galvanizing Bath},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {1211},
  doi = {10.3390/ma16031211}
}
Kostenlos starten →