Optimization of Hexagonal Structure for Enhancing Heat Transfer in Storage System
Materials · 31.01.2023 · 16 (3) · 1207
DOI: 10.3390/ma16031207 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.01.2023. Verfasst von Natalia Raźny und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Lightweight Elements Engineering, Foundry and Automation, Faculty of Mechanical Engineering, Wrocław University of Science and Technolo…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Thermal performance was tested during cycling work for latent heat storage systems based on KNO3 and NaNO3 (weight ratio 54:46). For heat transfer improvement, cast aluminum honeycomb-shaped structures were produced via 3D printing of polymer model and investment casting. Different wall thicknesses were tested at 1.2 mm and 1.6 mm. The obtained results were compared to working cycles of pure PCM bed. The use of enhancers is reported to improve the rate of charging and discharging of the deposit. In the next step, the structures were examined with numerical simulation performed with ANSYS Fluent software. The wall thicknesses taken into consideration were the following: 0.8, 1.2, 1.6, and 2.0 mm. An insert with a greater wall thickness allows for smaller dT/dt and better heat distribution in the vessel. The investment casting process enables the manufacturing of complex structures of custom shapes without porosity and contamination.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Lightweight Elements Engineering, Foundry and Automation, Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland.
- Department of Thermodynamics and Renewable Energy Sources, Faculty of Mechanical and Power Engineering, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland.
ORCID-Profile: Natalia Raźny, Anna Dmitruk, Artur Nemś, Magdalena Nemś
Zitieren
APA
Raźny, N., Dmitruk, A., Nemś, A., Nemś, M., & Naplocha, K. (2023). Optimization of Hexagonal Structure for Enhancing Heat Transfer in Storage System. Materials, 16(3), 1207. https://doi.org/10.3390/ma16031207
Vancouver
Raźny N, Dmitruk A, Nemś A, Nemś M, Naplocha K. Optimization of Hexagonal Structure for Enhancing Heat Transfer in Storage System. Materials. 2023;16(3):1207. doi:10.3390/ma16031207
BibTeX
@article{Rany2023,
author = {Raźny, Natalia and Dmitruk, Anna and Nemś, Artur and Nemś, Magdalena and Naplocha, Krzysztof},
title = {Optimization of Hexagonal Structure for Enhancing Heat Transfer in Storage System},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {1207},
doi = {10.3390/ma16031207}
}
EUVIMED