EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reinforcement Corrosion Testing in Concrete and Fiber Reinforced Concrete Specimens Exposed to Aggressive External Factors

Wioletta Raczkiewicz iD, Magdalena Bacharz, Kamil Bacharz iD, Michał Teodorczyk

Materials · 30.01.2023 · 16 (3) · 1174

DOI: 10.3390/ma16031174 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.01.2023. Verfasst von Wioletta Raczkiewicz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Strength of Materials and Building Structures, Faculty of Civil Engineering and Architecture, Kielce University of Technology, 25-314 K…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Minister of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the leading causes of reinforced concrete degradation is chloride attack. It occurs due to the penetration of chlorides through pores and cracks into the concrete cover. This phenomenon becomes more dangerous if reinforced concrete elements are subjected to cyclic temperature changes. The concrete cover protects against corrosion. This paper presents research, the primary purpose of which was to determine the effect of the addition of steel fibers to concrete on the development of corrosion of the main reinforcement. The tests were carried out on three types of reinforced concrete specimens made of ordinary concrete and concrete with different amounts of steel fibers (0.25% and 0.50%). In order to initiate corrosion processes, specimens were partially submerged in a 3% sodium chloride solution and were subjected to freeze–thaw cycles. The electrochemical polarization galvanostatic pulse method was used for analyzing the reinforcement corrosion activity. Moreover, it was verified whether the corrosion of reinforced concrete elements affects the acoustic emission wave velocity. The addition of steel micro-reinforcement fibers increases the corrosion resistance of reinforced concrete. In addition, a strong linear correlation between the AE wave velocity and the values of the corrosion current density was revealed.

Schlagwörter

Stichwörter der Autor:innen

AE methodGP methodchloride corrosionconcrete coverfreeze–thaw cyclesrebarsteel fibers

Autor:innen und Institutionen

  • Department of Strength of Materials and Building Structures, Faculty of Civil Engineering and Architecture, Kielce University of Technology, 25-314 Kielce, Poland.
  • Independent Researcher, 03-193 Warsaw, Poland.

ORCID-Profile: Wioletta Raczkiewicz, Kamil Bacharz

Förderung

  • Minister of Science and Higher Education

Zitieren

APA

Raczkiewicz, W., Bacharz, M., Bacharz, K., & Teodorczyk, M. (2023). Reinforcement Corrosion Testing in Concrete and Fiber Reinforced Concrete Specimens Exposed to Aggressive External Factors. Materials, 16(3), 1174. https://doi.org/10.3390/ma16031174

Vancouver

Raczkiewicz W, Bacharz M, Bacharz K, Teodorczyk M. Reinforcement Corrosion Testing in Concrete and Fiber Reinforced Concrete Specimens Exposed to Aggressive External Factors. Materials. 2023;16(3):1174. doi:10.3390/ma16031174

BibTeX
@article{Raczkiewicz2023,
  author = {Raczkiewicz, Wioletta and Bacharz, Magdalena and Bacharz, Kamil and Teodorczyk, Michał},
  title = {Reinforcement Corrosion Testing in Concrete and Fiber Reinforced Concrete Specimens Exposed to Aggressive External Factors},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {1174},
  doi = {10.3390/ma16031174}
}
Kostenlos starten →