EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Compressive Strength of Fly Ash-Slag Based Geopolymer Paste Based on Multi-Optimized Artificial Neural Network

Min Bai, Zhe Zhang, Kaiyue Cao, Hui Li, Cheng He

Materials · 27.01.2023 · 16 (3) · 1090

DOI: 10.3390/ma16031090 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.01.2023. Verfasst von Min Bai und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Chang'an University, Xi'an 710064, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fly ash-slag geopolymer is regarded as one of the new green cementitious materials that can replace cement, but it is difficult to predict its mechanical properties by conventional methods. Therefore, in the present study, the back propagation (BP) artificial neural network technique is used to predict the compressive strength of the fly ash-slag geopolymer. In this paper, data from the published literature were collected as the training set and the experimental results from laboratory experiments were used as the test set. Eight input parameters were determined, as follows: the percentage of fly ash, the percentage of slag, the water–cement ratio, the curing age, the modulus of alkali activator, the mass ratio of NaOH to Na2SiO3 and the moles of Na2O and SiO2 in the alkali activator. Three multilayer artificial neural network models were constructed using the Levenberg–Marquardt (LM), Bayesian regularization (BR) and scaled conjugate gradient (SCG) algorithms to compare the prediction accuracy of the compressive strength of the fly ash-slag geopolymer paste at different ages (3, 7, and 28 d). It was concluded that the training set error of the BR–BP neural network was the smallest. Ultimately, the hyperparameter optimization of the BR–BP neural network was carried out to compare the training set and the test set errors before and after the optimization, and the results show that the BR–BP neural network model with hyperparameter optimization had the highest prediction accuracy.

Schlagwörter

Stichwörter der Autor:innen

artificial neural networkcompressive strengthfly ash and slaggeopolymer paste

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Chang'an University, Xi'an 710064, China.
  • Engineering Research Central of Pavement Materials, Ministry of Education of P.R. China, Chang'an University, Xi'an 710061, China.
  • School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Bai, M., Zhang, Z., Cao, K., Li, H., & He, C. (2023). Prediction of Compressive Strength of Fly Ash-Slag Based Geopolymer Paste Based on Multi-Optimized Artificial Neural Network. Materials, 16(3), 1090. https://doi.org/10.3390/ma16031090

Vancouver

Bai M, Zhang Z, Cao K, Li H, He C. Prediction of Compressive Strength of Fly Ash-Slag Based Geopolymer Paste Based on Multi-Optimized Artificial Neural Network. Materials. 2023;16(3):1090. doi:10.3390/ma16031090

BibTeX
@article{Bai2023,
  author = {Bai, Min and Zhang, Zhe and Cao, Kaiyue and Li, Hui and He, Cheng},
  title = {Prediction of Compressive Strength of Fly Ash-Slag Based Geopolymer Paste Based on Multi-Optimized Artificial Neural Network},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {1090},
  doi = {10.3390/ma16031090}
}
Kostenlos starten →