EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Overview of the Cast Polyolefin Film Extrusion Technology for Multi-Layer Packaging Applications

Damian Dziadowiec, Danuta Matykiewicz iD, Marek Szostak iD, Jacek Andrzejewski iD

Materials · 26.01.2023 · 16 (3) · 1071

DOI: 10.3390/ma16031071 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 26.01.2023. Verfasst von Damian Dziadowiec und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland. Die Arbeit wurde bisher 77-mal zitiert (Crossref) und nennt 108 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Education in Poland, Applied Doctorate Program of the Ministry of Education and Science in Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The review article presents the technology of producing polyolefin-based films by extrusion casting. Due to the wide use of this type of film as packaging for food and other goods, obtaining films with favorable properties is still a challenge for many groups of producers in the plastics market. The feedblock process and multimanifold process are the main methods of producing multi-layer film. In the case of food films, appropriate barrier properties are required, as well as durability and puncture resistance also at low temperatures. On the other hand, in order to properly pack and present products, an appropriate degree of transparency must be maintained. Therefore, processing aids such as anti-slip, anti-block and release agents are commonly used. Other popular modifiers, such as waxes, fatty acid amides and mineral fillers—silica, talc or calcium carbonate–and their use in film extrusion are discussed. The article also presents common production problems and their prevention.

Schlagwörter

Stichwörter der Autor:innen

extrusion castingfilmmultilayerpackingpolyethylenepolypropylene

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland.
  • Eurocast Sp. z o.o., Wejherowska 9, 84-220 Strzebielino, Poland.

ORCID-Profile: Danuta Matykiewicz, Marek Szostak, Jacek Andrzejewski

Förderung

  • Ministry of Science and Education in Poland
  • Applied Doctorate Program of the Ministry of Education and Science in Poland

Zitieren

APA

Dziadowiec, D., Matykiewicz, D., Szostak, M., & Andrzejewski, J. (2023). Overview of the Cast Polyolefin Film Extrusion Technology for Multi-Layer Packaging Applications. Materials, 16(3), 1071. https://doi.org/10.3390/ma16031071

Vancouver

Dziadowiec D, Matykiewicz D, Szostak M, Andrzejewski J. Overview of the Cast Polyolefin Film Extrusion Technology for Multi-Layer Packaging Applications. Materials. 2023;16(3):1071. doi:10.3390/ma16031071

BibTeX
@article{Dziadowiec2023,
  author = {Dziadowiec, Damian and Matykiewicz, Danuta and Szostak, Marek and Andrzejewski, Jacek},
  title = {Overview of the Cast Polyolefin Film Extrusion Technology for Multi-Layer Packaging Applications},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {1071},
  doi = {10.3390/ma16031071}
}
Kostenlos starten →