Mechanical Properties of AISI 316L Lattice Structures via Laser Powder Bed Fusion as a Function of Unit Cell Features
Materials · 23.01.2023 · 16 (3) · 1025
DOI: 10.3390/ma16031025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.01.2023. Verfasst von Luis H Olivas-Alanis und 6 weiteren Autor:innen. Beteiligte Einrichtung: Tecnologico de Monterrey, School of Engineering and Sciences, Av. Eugenio Garza Sada 2501, Monterrey 64849, Mexico. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Manufacturing Research Group of Tecnologico de Monterrey, Consejo Nacional de Ciencia y Tecnología in Mexico.
Abstract (Originalsprache)
The growth of additive manufacturing processes has enabled the production of complex and smart structures. These fabrication techniques have led research efforts to focus on the application of cellular materials, which are known for their thermal and mechanical benefits. Herein, we studied the mechanical behavior of stainless-steel (AISI 316L) lattice structures both experimentally and computationally. The lattice architectures were body-centered cubic, hexagonal vertex centroid, and tetrahedron in two cell sizes and at two different rotation angles. A preliminary computational study assessed the deformation behavior of porous cylindrical samples under compression. After the simulation results, selected samples were manufactured via laser powder bed fusion. The results showed the effects of the pore architecture, unit cell size, and orientation on the reduction in the mechanical properties. The relative densities between 23% and 69% showed a decrease in the bulk material stiffness up to 93%. Furthermore, the different rotation angles resulted in a similar porosity level but different stiffnesses. The simulation analysis and experimental results indicate that the variation in the strut position with respect to the force affected the deformation mechanism. The tetrahedron unit cell showed the smallest variation in the elastic modulus and off-axis displacements due to the cell orientation. This study collected computational and experimental data for tuning the mechanical properties of lattice structures by changing the geometry, size, and orientation of the unit cell.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Tecnologico de Monterrey, School of Engineering and Sciences, Av. Eugenio Garza Sada 2501, Monterrey 64849, Mexico.
- Laboratorio Nacional de Manufactura Aditiva y Digital MADiT, Autopista al Aeropuerto, Km. 9.5, Calle Alianza Norte 100, Parque PIIT, Apodaca 66629, Mexico.
- Tecnologico de Monterrey, School of Engineering and Sciences, Epigmenio González 500, Querétaro 76130, Mexico.
- Tecnologico de Monterrey, Institute of Advanced Materials for Sustainable Manufacturing, Av. Eugenio Garza Sada 2501, Monterrey 64849, Mexico.
ORCID-Profile: Luis H Olivas-Alanis, Omar Lopez-Botello, Elisa Vazquez-Lepe, Enrique Cuan-Urquizo, Ciro A Rodriguez
Förderung
- Advanced Manufacturing Research Group of Tecnologico de Monterrey
- Consejo Nacional de Ciencia y Tecnología in Mexico
Zitieren
APA
Olivas-Alanis, L. H., Fraga-Martínez, A. A., García-López, E., Lopez-Botello, O., Vazquez-Lepe, E., Cuan-Urquizo, E., & Rodriguez, C. A. (2023). Mechanical Properties of AISI 316L Lattice Structures via Laser Powder Bed Fusion as a Function of Unit Cell Features. Materials, 16(3), 1025. https://doi.org/10.3390/ma16031025
Vancouver
Olivas-Alanis LH, Fraga-Martínez AA, García-López E, Lopez-Botello O, Vazquez-Lepe E, Cuan-Urquizo E, et al. Mechanical Properties of AISI 316L Lattice Structures via Laser Powder Bed Fusion as a Function of Unit Cell Features. Materials. 2023;16(3):1025. doi:10.3390/ma16031025
BibTeX
@article{OlivasAlanis2023,
author = {Olivas-Alanis, Luis H and Fraga-Martínez, Antonio Abraham and García-López, Erika and Lopez-Botello, Omar and Vazquez-Lepe, Elisa and Cuan-Urquizo, Enrique and Rodriguez, Ciro A},
title = {Mechanical Properties of AISI 316L Lattice Structures via Laser Powder Bed Fusion as a Function of Unit Cell Features},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {1025},
doi = {10.3390/ma16031025}
}
EUVIMED