EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting

Stepan Kolomy iD, Josef Sedlak iD, Jan Zouhar iD, Martin Slany, Marek Benc, David Dobrocky iD, Igor Barenyi, Jozef Majerik

Materials · 20.01.2023 · 16 (3) · 977

DOI: 10.3390/ma16030977 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.01.2023. Verfasst von Stepan Kolomy und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Brno University of Technology, 616 00 Brno, Czech Republic. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brno University of Technology, University of Defence Brno, Slovak Research and Development Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper deals with the study of high-strength M300 maraging steel produced using the selective laser melting method. Heat treatment consists of solution annealing and subsequent aging; the influence of the selected aging temperatures on the final mechanical properties—microhardness and compressive yield strength—and the structure of the maraging steel are described in detail. The microstructure of the samples is examined using optical and electron microscopy. The compressive test results show that the compressive yield strength increased after heat treatment up to a treatment temperature of 480 °C and then gradually decreased. The sample aged at 480 °C also exhibited the highest observed microhardness of 562 HV. The structure of this sample changed from the original melt pools to a relatively fine-grained structure with a high fraction of high-angle grain boundaries (72%).

Schlagwörter

Stichwörter der Autor:innen

agingmaraging steelmicrohardnessmicrostructureselective laser melting

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Brno University of Technology, 616 00 Brno, Czech Republic.
  • Department of Mechanical Engineering, Faculty of Military Technology, University of Defence in Brno, 602 00 Brno, Czech Republic.
  • Department of Engineering, Faculty of Special Technology, Alexander Dubcek University of Trencin, Pri Parku 19, 911 06 Trenčín, Slovakia.

ORCID-Profile: Stepan Kolomy, Josef Sedlak, Jan Zouhar, David Dobrocky

Förderung

  • Brno University of Technology
  • University of Defence Brno
  • Slovak Research and Development Agency
  • Modern technologies for processing advanced materials used for interdisciplinary applications
  • DZRO Military autonomous and robotic systems

Zitieren

APA

Kolomy, S., Sedlak, J., Zouhar, J., Slany, M., Benc, M., Dobrocky, D., Barenyi, I., & Majerik, J. (2023). Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting. Materials, 16(3), 977. https://doi.org/10.3390/ma16030977

Vancouver

Kolomy S, Sedlak J, Zouhar J, Slany M, Benc M, Dobrocky D, et al. Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting. Materials. 2023;16(3):977. doi:10.3390/ma16030977

BibTeX
@article{Kolomy2023,
  author = {Kolomy, Stepan and Sedlak, Josef and Zouhar, Jan and Slany, Martin and Benc, Marek and Dobrocky, David and Barenyi, Igor and Majerik, Jozef},
  title = {Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {977},
  doi = {10.3390/ma16030977}
}
Kostenlos starten →