Microstructure Evolution and Localized Corrosion Susceptibility of an Al-Zn-Mg-Cu-Zr 7xxx Alloy with Minor Cr Addition
Materials · 19.01.2023 · 16 (3) · 946
DOI: 10.3390/ma16030946 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.01.2023. Verfasst von Chijioke Kenneth Akuata und 3 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Corrosion and Corrosion Protection, Foundry Institute, Division of Materials Science and Engineering, RWTH Aachen University, Intzestraße 5,…. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: RWTH Aachen University.
Abstract (Originalsprache)
Microstructure optimization of Al-Zn-Mg-Cu-Zr aluminum alloys, particularly through recrystallization inhibition, for improved strength and corrosion resistance properties has been an important consideration in alloy development for aerospace applications. Addition of rare earth elements, sometimes combined with Cr, has been found to be beneficial in this regard. In this study, the role of a single addition of 0.1 wt.% Cr on microstructure evolution of an Al-Zn-Mg-Cu-Zr (7449) alloy during processing was systematically investigated by optical light microscopy, scanning electron microscopy, electron backscatter diffraction and scanning transmission electron microscopy. Susceptibility to localized corrosion after aging to T4, T6 and T76 conditions was evaluated by potentiodynamic polarization (PDP) measurements and an intergranular corrosion (IGC) test. A decrease in recrystallized fraction with 0.1 wt.% Cr addition was observed, which is attributed to the formation of Cu- and Zn-containing E (Al18Mg3Cr2) dispersoids and the larger as-cast grain size. Moreover, the depletion of alloying elements from solid solution due to the formation of the Cu- and Zn-containing E (Al18Mg3Cr2) dispersoids and η Mg(Zn,Cu,Al)2 phase at its interface affects grain-boundary precipitation. The observed decrease in localized corrosion susceptibility with minor Cr addition is correlated with the microstructure and equally discussed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chair of Corrosion and Corrosion Protection, Foundry Institute, Division of Materials Science and Engineering, RWTH Aachen University, Intzestraße 5, 52072 Aachen, Germany.
- The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkut's University of Technology North Bangkok (KMUTNB), 1518 Pracharat 1 Road, Wongsawang, Bangsue, Bangkok 10800, Thailand.
- Leibniz-Institute für Werkstofforientierte Technologien-IWT, Badgasteiner Straße, 3, 28359 Bremen, Germany.
- Deutsches Zentrum für Luft- und Raumfahrt, German Aerospace Center, Institute of Materials Physics in Space, Linder Höhe, 51147 Cologne, Germany.
ORCID-Profile: Daniela Zander
Förderung
- RWTH Aachen University
Zitieren
APA
Akuata, C. K., Gunawan, F. R., Suwanpinij, P., & Zander, D. (2023). Microstructure Evolution and Localized Corrosion Susceptibility of an Al-Zn-Mg-Cu-Zr 7xxx Alloy with Minor Cr Addition. Materials, 16(3), 946. https://doi.org/10.3390/ma16030946
Vancouver
Akuata CK, Gunawan FR, Suwanpinij P, Zander D. Microstructure Evolution and Localized Corrosion Susceptibility of an Al-Zn-Mg-Cu-Zr 7xxx Alloy with Minor Cr Addition. Materials. 2023;16(3):946. doi:10.3390/ma16030946
BibTeX
@article{Akuata2023,
author = {Akuata, Chijioke Kenneth and Gunawan, Feliksianus Robby and Suwanpinij, Piyada and Zander, Daniela},
title = {Microstructure Evolution and Localized Corrosion Susceptibility of an Al-Zn-Mg-Cu-Zr 7xxx Alloy with Minor Cr Addition},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {946},
doi = {10.3390/ma16030946}
}
EUVIMED