EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Aluminum Alloy Anode with Various Iron Content Influencing the Performance of Aluminum-Ion Batteries

Ghadir Razaz iD, Shahrzad Arshadirastabi iD, Nicklas Blomquist iD, Jonas Örtegren, Torbjörn Carlberg, Magnus Hummelgård, Håkan Olin iD

Materials · 18.01.2023 · 16 (3) · 933

DOI: 10.3390/ma16030933 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.01.2023. Verfasst von Ghadir Razaz und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Natural Sciences, Mid Sweden University, 85170 Sundsvall, Sweden. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: J. Gust.Richerts foundation, J. Gust. Richerts foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Considerable research has been devoted to the development of cathode materials for Al-ion batteries, but challenges remain regarding the behavior of aluminum anodes. Inert oxide (Al2O3) film on Al surfaces presents a barrier to electrochemical activity. The structure of the oxide film needs to be weakened to facilitate ion transfer during electrochemical activity. This study addresses oxide film challenges by studying Al alloy anodes with different iron content. The results reveal that using an anode of 99% Al 1% Fe in a cell increases the cycling lifetime by 48%, compared to a 99.99% Al anode. The improvement observed with the 99% Al 1% Fe anode is attributed to its fractional surface area corrosion being about 12% larger than that of a 99.99% Al anode. This is coupled to precipitation of a higher number of Al3Fe particles, which are evenly scattered in the Al matrix of 99% Al 1% Fe. These Al3Fe particles constitute weak spots in the oxide film for the electrolyte to attack, and access to fresh Al. The addition of iron to an Al anode thus offers a cheap and easy route for targeting the oxide passivating film challenge in Al-ion batteries.

Schlagwörter

Stichwörter der Autor:innen

99% Al 1% Fe alloy anodeAl-ion batteryAl3Fe particlecorrosioncycling performanceoxide film

Autor:innen und Institutionen

  • Department of Natural Sciences, Mid Sweden University, 85170 Sundsvall, Sweden.

ORCID-Profile: Ghadir Razaz, Shahrzad Arshadirastabi, Nicklas Blomquist, Håkan Olin

Förderung

  • J. Gust.Richerts foundation
  • J. Gust. Richerts foundation

Zitieren

APA

Razaz, G., Arshadirastabi, S., Blomquist, N., Örtegren, J., Carlberg, T., Hummelgård, M., & Olin, H. (2023). Aluminum Alloy Anode with Various Iron Content Influencing the Performance of Aluminum-Ion Batteries. Materials, 16(3), 933. https://doi.org/10.3390/ma16030933

Vancouver

Razaz G, Arshadirastabi S, Blomquist N, Örtegren J, Carlberg T, Hummelgård M, et al. Aluminum Alloy Anode with Various Iron Content Influencing the Performance of Aluminum-Ion Batteries. Materials. 2023;16(3):933. doi:10.3390/ma16030933

BibTeX
@article{Razaz2023,
  author = {Razaz, Ghadir and Arshadirastabi, Shahrzad and Blomquist, Nicklas and Örtegren, Jonas and Carlberg, Torbjörn and Hummelgård, Magnus and Olin, Håkan},
  title = {Aluminum Alloy Anode with Various Iron Content Influencing the Performance of Aluminum-Ion Batteries},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {933},
  doi = {10.3390/ma16030933}
}
Kostenlos starten →