EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Formation and Characterization of the Recast Layer Formed on Inconel 718 during Wire Electro Discharge Machining

Bandar Alkahlan, Thamer Tabbakh iD, Abdulaziz Kurdi iD, Alokesh Pramanik iD, Animesh K Basak iD

Materials · 18.01.2023 · 16 (3) · 930

DOI: 10.3390/ma16030930 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.01.2023. Verfasst von Bandar Alkahlan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Materials Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present work investigates the formation and microstructural and micro-mechanical characterization of the recast layer that formed on Inconel 718 alloy in the course of the wire electro-discharge machining (WEDM). The as-machined surface contains globules, shallow cracks, and re-deposition of molten materials, together with the elements from the decomposition of wire electrode and electrolyte, which does not exceed beyond the surface of the recast layer. Under presently investigated machining parameters, the recast layer was about 6.2 ± 2.1 µm thick. There was no presence of a heat-affected zone (HAZ), as otherwise indicated for other hard-to-cut materials. The transmission electron microscopy (TEM) and electron back-scattered diffraction (EBSD) investigations show that the microstructure of the recast layer is similar to that of bulk alloy. Micro-mechanical characterizations of the recast layer were investigated via in-situ micro-pillar compression on the micro-pillars fabricated on the recast layer. The strength of the superficial layer (1151.6 ± 51.1 MPa) was about 2.2 times higher than that of the base material (523.2 ± 22.1 MPa), as revealed by the in-situ micro-pillar compression.

Schlagwörter

Stichwörter der Autor:innen

EBSDInconelmicro-pillar compressionmicrostructurerecast layerwire EDM

Autor:innen und Institutionen

  • Advanced Materials Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia.
  • Microelectronics and Semiconductors Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia.
  • School of Civil and Mechanical Engineering, Curtin University, Bentley, WA 6102, Australia.
  • Adelaide Microscopy, The University of Adelaide, Adelaide, SA 5005, Australia.

ORCID-Profile: Thamer Tabbakh, Abdulaziz Kurdi, Alokesh Pramanik, Animesh K Basak

Zitieren

APA

Alkahlan, B., Tabbakh, T., Kurdi, A., Pramanik, A., & Basak, A. K. (2023). Formation and Characterization of the Recast Layer Formed on Inconel 718 during Wire Electro Discharge Machining. Materials, 16(3), 930. https://doi.org/10.3390/ma16030930

Vancouver

Alkahlan B, Tabbakh T, Kurdi A, Pramanik A, Basak AK. Formation and Characterization of the Recast Layer Formed on Inconel 718 during Wire Electro Discharge Machining. Materials. 2023;16(3):930. doi:10.3390/ma16030930

BibTeX
@article{Alkahlan2023,
  author = {Alkahlan, Bandar and Tabbakh, Thamer and Kurdi, Abdulaziz and Pramanik, Alokesh and Basak, Animesh K},
  title = {Formation and Characterization of the Recast Layer Formed on Inconel 718 during Wire Electro Discharge Machining},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {3},
  pages = {930},
  doi = {10.3390/ma16030930}
}
Kostenlos starten →