Modeling and Vibration Control of Sandwich Composite Plates
Materials · 17.01.2023 · 16 (3) · 896
DOI: 10.3390/ma16030896 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 17.01.2023. Verfasst von Zhicheng Huang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Jingdezhen Ceramic University, Jingdezhen 333001, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of China, Science and Technology Projects of Jiangxi Education Department of China.
Abstract (Originalsprache)
A finite element dynamic model of the sandwich composite plate was developed based on classical laminate theory and Hamilton’s principle. A 4-node, 7-degree-of-freedom three-layer plate cell is constructed to simulate the interaction between the substrate, the viscoelastic damping layer, and the piezoelectric material layer. Among them, the viscoelastic layer is referred to as the complex constant shear modulus model, and the equivalent Rayleigh damping is introduced to represent the damping of the substrate. The established dynamics model has too many degrees of freedom, and the obtained dynamics model has good controllability and observability after adopting the joint reduced-order method of dynamic condensation in physical space and equilibrium in state space. The optimal quadratic (LQR) controller is designed for the active control of the sandwich panel, and the parameters of the controller parameters, the thickness of the viscoelastic layer, and the optimal covering position of the sandwich panel are optimized through simulation analysis. The results show that the finite element model established in this paper is still valid under different boundary conditions and different covering methods, and the model can still accurately and reliably represent the dynamic characteristics of the original system after using the joint step-down method. Under different excitation signals and different boundary conditions, the LQR control can effectively suppress the vibration of the sandwich plate. The optimal cover position of the sandwich plate is near the solid support end and far from the free-degree end. The parameters of controller parameters and viscoelastic layer thickness are optimized from several angles, respectively, and a reasonable optimization scheme can be selected according to the actual requirements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, Jingdezhen Ceramic University, Jingdezhen 333001, China.
- Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China.
ORCID-Profile: Zhicheng Huang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of China
- Science and Technology Projects of Jiangxi Education Department of China
Zitieren
APA
Huang, Z., Peng, H., Wang, X., & Chu, F. (2023). Modeling and Vibration Control of Sandwich Composite Plates. Materials, 16(3), 896. https://doi.org/10.3390/ma16030896
Vancouver
Huang Z, Peng H, Wang X, Chu F. Modeling and Vibration Control of Sandwich Composite Plates. Materials. 2023;16(3):896. doi:10.3390/ma16030896
BibTeX
@article{Huang2023,
author = {Huang, Zhicheng and Peng, Huanyou and Wang, Xingguo and Chu, Fulei},
title = {Modeling and Vibration Control of Sandwich Composite Plates},
journal = {Materials},
year = {2023},
volume = {16},
number = {3},
pages = {896},
doi = {10.3390/ma16030896}
}
EUVIMED