EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Bitumen Aging—Laboratory Simulation Methods Used in Practice and Selected Directions of Research on New Methods

Paweł Czajkowski iD, Andrzej Przyjazny, Grzegorz Boczkaj iD

Materials · 16.01.2023 · 16 (2) · 853

DOI: 10.3390/ma16020853 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 16.01.2023. Verfasst von Paweł Czajkowski und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, 80-233 Gdansk, Poland. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Changes in the properties of bitumen binders that occur as a result of aging have a huge impact on the durability of products produced from them. In particular, asphalt pavements, which constitute the most common use of petroleum bitumen, are susceptible to damage resulting from the increasing stiffness of the bitumen during its life cycle. Increased stiffness of asphalt pavements reduces the pavement resistance to low-temperature cracks and fatigue cracks, ultimately leading to the loss of their functional properties and the need for road repair. The rate of changes in bitumen properties is influenced by many factors, the most important of which are environmental conditions, technological parameters of binder processing, and physicochemical properties. The greatest impact on minimizing the adverse effect of aging is the use of bitumen suitably resistant to aging, and changing the technological parameters of its application. This article reviews the literature and standardized test methods of bitumen aging, with a focus on the methods that are most often used in practice, to evaluate the suitability of bitumen for use in road construction. The presented methods are limited to aging simulation. This mini-review presents the most important stages of aging procedures, their advantages and limitations, as identified by the authors of this publication for different types of bitumen. Moreover, the most important directions of developments in the field of new laboratory aging tests are highlighted. The suggestions are based on the industrial practice of the authors of this review, taking into account identified demands for quality control in the industry.

Schlagwörter

Stichwörter der Autor:innen

binderbitumenchemical degradationlaboratory aging methodsoxidationroads

Autor:innen und Institutionen

  • Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, 80-233 Gdansk, Poland.
  • Rafineria Gdańska, Elbląska 135 Str., 80-718 Gdansk, Poland.
  • Department of Natural Sciences, Kettering University, 1700 University Avenue, Flint, MI 48504, USA.
  • EkoTech Center, Gdansk University of Technology, G. Narutowicza Str. 11/12, 80-233 Gdansk, Poland.

ORCID-Profile: Paweł Czajkowski, Grzegorz Boczkaj

Zitieren

APA

Czajkowski, P., Przyjazny, A., & Boczkaj, G. (2023). Bitumen Aging—Laboratory Simulation Methods Used in Practice and Selected Directions of Research on New Methods. Materials, 16(2), 853. https://doi.org/10.3390/ma16020853

Vancouver

Czajkowski P, Przyjazny A, Boczkaj G. Bitumen Aging—Laboratory Simulation Methods Used in Practice and Selected Directions of Research on New Methods. Materials. 2023;16(2):853. doi:10.3390/ma16020853

BibTeX
@article{Czajkowski2023,
  author = {Czajkowski, Paweł and Przyjazny, Andrzej and Boczkaj, Grzegorz},
  title = {Bitumen Aging—Laboratory Simulation Methods Used in Practice and Selected Directions of Research on New Methods},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {853},
  doi = {10.3390/ma16020853}
}
Kostenlos starten →