Impact of Blank Holding Force and Friction on Springback and Its Prediction of a Hat-Shaped Part Made of Dual-Phase Steel
Materials · 13.01.2023 · 16 (2) · 811
DOI: 10.3390/ma16020811 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.01.2023. Verfasst von Peter Mulidrán und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Technology and Materials Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Mäsiarska 74, 040 01 Kosice, Sl…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency, Ministry of Economy of the Slovak Republic.
Abstract (Originalsprache)
Formability and its prediction of high-strength steels is an important research subject for forming specialists and researchers in this field. Springback and its accurate prediction of high-strength steels are very common issues in metal forming processes. In this article, the impact of blank holding force and friction on the parts springback made of dual-phase steel was studied. Numerical predictions of the springback effect were conducted using nine combinations of yield criteria and hardening rules. Results from experiments were evaluated and compared with results from numerical simulations. The use of lower blank holding forces and PE foil can reduce springback by a significant amount. Numerical simulations where the Yoshida-Uemori hardening rule was applied produced more accurate springback prediction results compared to simulations that used Krupkowski and Hollomon’s isotropic hardening rules in number of cases.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Technology and Materials Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Mäsiarska 74, 040 01 Kosice, Slovakia.
- Faculty of Materials, Metallurgy and Recycling, Technical University of Kosice, Park Komenskeho 10, 040 01 Kosice, Slovakia.
- Bodva Industry and Innovation Cluster, Budulov 174, 045 01 Moldava nad Bodvou, Slovakia.
ORCID-Profile: Peter Mulidrán, Emil Spišák, Miroslav Tomáš, Janka Majerníková, Jana Bidulská, Róbert Bidulský
Förderung
- Slovak Research and Development Agency
- Ministry of Economy of the Slovak Republic
Zitieren
APA
Mulidrán, P., Spišák, E., Tomáš, M., Majerníková, J., Bidulská, J., & Bidulský, R. (2023). Impact of Blank Holding Force and Friction on Springback and Its Prediction of a Hat-Shaped Part Made of Dual-Phase Steel. Materials, 16(2), 811. https://doi.org/10.3390/ma16020811
Vancouver
Mulidrán P, Spišák E, Tomáš M, Majerníková J, Bidulská J, Bidulský R. Impact of Blank Holding Force and Friction on Springback and Its Prediction of a Hat-Shaped Part Made of Dual-Phase Steel. Materials. 2023;16(2):811. doi:10.3390/ma16020811
BibTeX
@article{Mulidrn2023,
author = {Mulidrán, Peter and Spišák, Emil and Tomáš, Miroslav and Majerníková, Janka and Bidulská, Jana and Bidulský, Róbert},
title = {Impact of Blank Holding Force and Friction on Springback and Its Prediction of a Hat-Shaped Part Made of Dual-Phase Steel},
journal = {Materials},
year = {2023},
volume = {16},
number = {2},
pages = {811},
doi = {10.3390/ma16020811}
}
EUVIMED