EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Characterisation of Lime-Based Textile-Reinforced Mortar Systems Made of Either Jute or Flax Fabrics

Marco Pepe iD, Rosario Lombardi, Giuseppe Ferrara iD, Stefano Agnetti iD, Enzo Martinelli iD

Materials · 11.01.2023 · 16 (2) · 709

DOI: 10.3390/ma16020709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.01.2023. Verfasst von Marco Pepe und 4 weiteren Autor:innen. Beteiligte Einrichtung: DICiv-Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Salerno.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing buildings are often in need of strengthening interventions, and several technical solutions have been recently developed for this purpose. Among them, the use of textile-reinforced mortar (TRM) composites has gained consensus as a technically viable and economically convenient option. Moreover, TRM has the potential to be employed as a reversible and sustainable strengthening technique for masonry buildings. In this context, the present paper aims to investigate the mechanical properties of TRM systems consisting of sustainable phases, such as lime-based matrices and natural fabrics produced by waiving fibers obtained from plants, such as Jute or Flax. This class composite system can be referred to as natural TRM and is denoted by the acronym NTRM. The present study moves from the geometric and mechanical characterisation of fibres and fabrics and, after having also investigated the properties of the mortar, it reports the results of tensile tests carried out on specimens of the NTRM systems under consideration, with the main aim of providing the empirical bases of the relationships between the geometric and physical properties of the constituents and the resulting mechanical response of the composite system. The obtained results show that the considered Flax-TRM system has an apparent composite behavior, as its response to tension is clearly characterised by the well-known three stages corresponding to the elastic response, the formation of cracks, and the reinforcement response up to rupture. Conversely, the Jute-TRM system needs to be further improved in terms of balance between the properties of the matrix and the internal reinforcement. Further studies will be devoted to this specific aspect and, more generally, to investigating the relationships between constituents’ properties and the NTRM behavior.

Schlagwörter

Stichwörter der Autor:innen

TRMcompositesnatural fibresstrengtheningsustainability

Autor:innen und Institutionen

  • DICiv-Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy.
  • TESIS srl, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy.
  • DISAT-Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi, 24, 10129 Torino, Italy.
  • Kimia s.p.a., Via del Rame, 73, 06134 Perugia, Italy.

ORCID-Profile: Marco Pepe, Giuseppe Ferrara, Stefano Agnetti, Enzo Martinelli

Förderung

  • University of Salerno

Zitieren

APA

Pepe, M., Lombardi, R., Ferrara, G., Agnetti, S., & Martinelli, E. (2023). Experimental Characterisation of Lime-Based Textile-Reinforced Mortar Systems Made of Either Jute or Flax Fabrics. Materials, 16(2), 709. https://doi.org/10.3390/ma16020709

Vancouver

Pepe M, Lombardi R, Ferrara G, Agnetti S, Martinelli E. Experimental Characterisation of Lime-Based Textile-Reinforced Mortar Systems Made of Either Jute or Flax Fabrics. Materials. 2023;16(2):709. doi:10.3390/ma16020709

BibTeX
@article{Pepe2023,
  author = {Pepe, Marco and Lombardi, Rosario and Ferrara, Giuseppe and Agnetti, Stefano and Martinelli, Enzo},
  title = {Experimental Characterisation of Lime-Based Textile-Reinforced Mortar Systems Made of Either Jute or Flax Fabrics},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {709},
  doi = {10.3390/ma16020709}
}
Kostenlos starten →