EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Computational Modeling of Doped 2D Anode Materials for Lithium-Ion Batteries

Alexander Galashev iD

Materials · 11.01.2023 · 16 (2) · 704

DOI: 10.3390/ma16020704 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 11.01.2023. Verfasst von Alexander Galashev. Beteiligte Einrichtung: Institute of High-Temperature Electrochemistry, Ural Branch, Russian Academy of Sciences, Akademicheskaya Str. 20, Yekaterinburg 620066, Russia. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Ministry of Education and Science of the Russian Federation, Ministry of Education and Science of the Russian Federation, Government of Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Development of high-performance lithium-ion batteries (LIBs) is boosted by the needs of the modern automotive industry and the wide expansion of all kinds of electronic devices. First of all, improvements should be associated with an increase in the specific capacity and charging rate as well as the cyclic stability of electrode materials. The complexity of experimental anode material selection is now the main limiting factor in improving LIB performance. Computer selection of anode materials based on first-principles and classical molecular dynamics modeling can be considered as the main paths to success. However, even combined anodes cannot always provide high LIB characteristics and it is necessary to resort to their alloying. Transmutation neutron doping (NTD) is the most appropriate way to improve the properties of thin film silicon anodes. In this review, the effectiveness of the NTD procedure for silicene/graphite (nickel) anodes is shown. With moderate P doping (up to 6%), the increase in the capacity of a silicene channel on a Ni substrate can be 15–20%, while maintaining the safety margin of silicene during cycling. This review can serve as a starting point for meaningful selection and optimization of the performance of anode materials.

Schlagwörter

Stichwörter der Autor:innen

copperfirst-principle calculationsgraphitelithium ion batterymolecular dynamicsnickelnitrogensilicenespectrum of electronic statestransmutation doping

Autor:innen und Institutionen

  • Institute of High-Temperature Electrochemistry, Ural Branch, Russian Academy of Sciences, Akademicheskaya Str. 20, Yekaterinburg 620066, Russia.
  • Institute of Chemical Engineering, Ural Federal University Named after the First President of Russia B.N. Yeltsin, Mira Str., 19, Yekaterinburg 620002, Russia.

ORCID-Profile: Alexander Galashev

Förderung

  • The Ministry of Education and Science of the Russian Federation
  • Ministry of Education and Science of the Russian Federation
  • Government of Russian Federation

Zitieren

APA

Galashev, A. (2023). Computational Modeling of Doped 2D Anode Materials for Lithium-Ion Batteries. Materials, 16(2), 704. https://doi.org/10.3390/ma16020704

Vancouver

Galashev A. Computational Modeling of Doped 2D Anode Materials for Lithium-Ion Batteries. Materials. 2023;16(2):704. doi:10.3390/ma16020704

BibTeX
@article{Galashev2023,
  author = {Galashev, Alexander},
  title = {Computational Modeling of Doped 2D Anode Materials for Lithium-Ion Batteries},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {704},
  doi = {10.3390/ma16020704}
}
Kostenlos starten →