EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification of Inclusions by Rare Earth Elements in a High-Strength Oil Casing Steel for Improved Sulfur Resistance

Xueyuan Jiang, Gen Li iD, Haiyan Tang, Jinwen Liu, Sen Cai, Jiaquan Zhang

Materials · 10.01.2023 · 16 (2) · 675

DOI: 10.3390/ma16020675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.01.2023. Verfasst von Xueyuan Jiang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, No. 30 Xueyuan Road, Haidian District, Beijing 1000…. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Beijing Natural Science Foundation, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steel casing pipes used in the construction of deep oil wells usually require both high strength and corrosion-resistant behavior. Due to the exploration of deep H2S-bearing oil reservoirs, sulfide stress cracking (SSC) is becoming an increasingly serious concern for casing steel. The nonmetallic inclusions in the steel are among the key reasons for its service failure. The rare earth element Ce can be used to modify the inclusions in casing steel and improve its SSC resistance. Here, taking C110 grade casing steel (the highest class currently in service) as the investigated object, the modification behavior of Ce inclusions in the steel and the effect of the addition of Ce in varying amounts (0.01, 0.024, and 0.042 wt.%) on the modified products were studied through high-temperature tube furnace experiments and thermodynamic calculations. The results showed that Ce had an obvious modification effect on the CaO·Al2O3 inclusions in casing steel, and the diffusion of dissolved Ce in the steel was the limiting step of the modification reaction. With the extension of reaction time, the sequence describing the modification of inclusions in the steel was determined as follows: CaO·Al2O3 → CeAlO3 → Ce2O3/Ce2O2S. The final stable product after modification depended on the amount of Ce added. With 0.01 wt.% Ce, the stable phase in molten steel was Ce2O3; on the other hand, upon adding ≥0.024 wt.% Ce, the stable phase became Ce2O2S. In addition, the thermodynamic stability of Ce2O3 decreased, and it was transformed into CeAlO3, Ce2O2S, Ce2S3, and CeS during solidification. On the basis of our results and the considerations for smooth casting, the addition of a proper amount of a rare earth element is suggested for industrial trials, following the achievement of a significant and surprising improvement in the qualified rate of SSC resistance for the final steel products. The relevant mechanism is also analyzed.

Schlagwörter

Stichwörter der Autor:innen

inclusionsoil casing steelrare earthsulfur resistancethermodynamic calculation

Autor:innen und Institutionen

  • School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, No. 30 Xueyuan Road, Haidian District, Beijing 100083, China.

ORCID-Profile: Gen Li

Förderung

  • Beijing Natural Science Foundation
  • National Natural Science Foundation of China

Zitieren

APA

Jiang, X., Li, G., Tang, H., Liu, J., Cai, S., & Zhang, J. (2023). Modification of Inclusions by Rare Earth Elements in a High-Strength Oil Casing Steel for Improved Sulfur Resistance. Materials, 16(2), 675. https://doi.org/10.3390/ma16020675

Vancouver

Jiang X, Li G, Tang H, Liu J, Cai S, Zhang J. Modification of Inclusions by Rare Earth Elements in a High-Strength Oil Casing Steel for Improved Sulfur Resistance. Materials. 2023;16(2):675. doi:10.3390/ma16020675

BibTeX
@article{Jiang2023,
  author = {Jiang, Xueyuan and Li, Gen and Tang, Haiyan and Liu, Jinwen and Cai, Sen and Zhang, Jiaquan},
  title = {Modification of Inclusions by Rare Earth Elements in a High-Strength Oil Casing Steel for Improved Sulfur Resistance},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {675},
  doi = {10.3390/ma16020675}
}
Kostenlos starten →