EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Understanding the Corrosion Behavior of Nickel–Aluminum Bronze Induced by Cavitation Corrosion Using Electrochemical Noise: Selective Phase Corrosion and Uniform Corrosion

Liang Li iD, Yanxin Qiao iD, Lianmin Zhang iD, Aili Ma, Rongyao Ma, Yugui Zheng

Materials · 10.01.2023 · 16 (2) · 669

DOI: 10.3390/ma16020669 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.01.2023. Verfasst von Liang Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: CAS Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel–aluminum bronze (NAB) is widely used to fabricate flow-handling components because of its good cavitation corrosion (CE) resistance and superior casting property. The existence of different phases, e.g., the α phase, β phase and κ phase, can cause significant selective phase corrosion on NAB. However, under the action of CE with different times, the influence of these phases on the corrosion behavior of NAB, including selective phase corrosion and uniform corrosion, needs to be further studied, which can contribute to a deep understanding of the CE mechanism of NAB in corrosive media. In this work, the corrosion behavior of NAB in 3.5 wt.% NaCl solution after different CE times was evaluated by electrochemical noise (EN), combined with scanning Kelvin probe force microscopy (SKPFM) and morphology analysis. The results showed that the corrosion behavior of NAB was closely associated with the variation in its complex microstructure after different CE times. Selective phase corrosion played a crucial role in the surface damage before 0.5 h of CE. With the prolongation of CE time, the stripping of κ phases decreased the degree of selective phase corrosion of NAB. As a result, both selective phase corrosion and uniform corrosion presented equal performances after 1 h of CE. However, after CE for 2–5 h, uniform corrosion had a dominant impact on the surface damage of NAB. Eventually, the corrosion mechanism of NAB after different CE times was clarified based on the relevant experimental results.

Schlagwörter

Stichwörter der Autor:innen

cavitation erosionelectrochemical noisenickel–aluminum bronzeselective phase corrosion

Autor:innen und Institutionen

  • CAS Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
  • School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China.

ORCID-Profile: Liang Li, Yanxin Qiao, Lianmin Zhang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, L., Qiao, Y., Zhang, L., Ma, A., Ma, R., & Zheng, Y. (2023). Understanding the Corrosion Behavior of Nickel–Aluminum Bronze Induced by Cavitation Corrosion Using Electrochemical Noise: Selective Phase Corrosion and Uniform Corrosion. Materials, 16(2), 669. https://doi.org/10.3390/ma16020669

Vancouver

Li L, Qiao Y, Zhang L, Ma A, Ma R, Zheng Y. Understanding the Corrosion Behavior of Nickel–Aluminum Bronze Induced by Cavitation Corrosion Using Electrochemical Noise: Selective Phase Corrosion and Uniform Corrosion. Materials. 2023;16(2):669. doi:10.3390/ma16020669

BibTeX
@article{Li2023,
  author = {Li, Liang and Qiao, Yanxin and Zhang, Lianmin and Ma, Aili and Ma, Rongyao and Zheng, Yugui},
  title = {Understanding the Corrosion Behavior of Nickel–Aluminum Bronze Induced by Cavitation Corrosion Using Electrochemical Noise: Selective Phase Corrosion and Uniform Corrosion},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {669},
  doi = {10.3390/ma16020669}
}
Kostenlos starten →