EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity

Hang Zheng, Ruixiang Zhang, Qin Xu, Xiangqing Kong, Wanting Sun, Ying Fu, Muhong Wu, Kaihui Liu

Materials · 09.01.2023 · 16 (2) · 622

DOI: 10.3390/ma16020622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.01.2023. Verfasst von Hang Zheng und 7 weiteren Autor:innen. Beteiligte Einrichtung: Songshan Lake Material Laboratory, Dongguan 523808, China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Major Project of Basic and Applied Basic Research, Innovative Model Factory Project of Songshan Lake Materials Laboratory, Educational Department of Henan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal laminated composites are widely used in industrial and commercial applications due to their excellent overall performance. In this study, the copper/graphene-aluminum-copper/graphene (Cu/Gr-Al-Cu/Gr) laminated composites were prepared by ingenious hot pressing design. Raman, optical microscope (OM), scanning electron microscope (SEM), van der Pauw (vdP), and X-Ray Diffractometer (XRD) were used to investigate the graphene status, interface bonding, diffusion layer thickness, electrical conductivity, Miller indices and secondary phases, respectively. The results demonstrate that the Cu-Al interfaces in the Cu/Gr-Al-Cu/Gr composites were free of pores, cracks and other defects and bonded well. The number of graphene layers was varied by regulating the thickness of the Cu/Gr layer, with the Cu/Gr foils fabricated by chemical vapor deposition (CVD). The electrical conductivity of the composite was significantly improved by the induced high-quality interfaces Cu/Gr structure. The increased number of graphene layers is beneficial for enhancing the electrical conductivity of the Cu/Gr-Al-Cu/Gr composite, and the highest conductivity improved by 20.5% compared to that of raw Al.

Schlagwörter

Stichwörter der Autor:innen

copper and aluminum compositeselectrical conductivitygraphenehot pressinginterface

Autor:innen und Institutionen

  • Songshan Lake Material Laboratory, Dongguan 523808, China.
  • College of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou 450001, China.
  • State Key Laboratory for Mesoscopic Physics, Peking University, Beijing 100871, China.

Förderung

  • Guangdong Major Project of Basic and Applied Basic Research
  • Innovative Model Factory Project of Songshan Lake Materials Laboratory
  • Educational Department of Henan Province

Zitieren

APA

Zheng, H., Zhang, R., Xu, Q., Kong, X., Sun, W., Fu, Y., Wu, M., & Liu, K. (2023). Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity. Materials, 16(2), 622. https://doi.org/10.3390/ma16020622

Vancouver

Zheng H, Zhang R, Xu Q, Kong X, Sun W, Fu Y, et al. Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity. Materials. 2023;16(2):622. doi:10.3390/ma16020622

BibTeX
@article{Zheng2023,
  author = {Zheng, Hang and Zhang, Ruixiang and Xu, Qin and Kong, Xiangqing and Sun, Wanting and Fu, Ying and Wu, Muhong and Liu, Kaihui},
  title = {Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {622},
  doi = {10.3390/ma16020622}
}
Kostenlos starten →