Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates
Materials · 06.01.2023 · 16 (2) · 581
DOI: 10.3390/ma16020581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.01.2023. Verfasst von Wen-Jian Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chang-Zhu-Tan National Independent Innovation Demonstration Zone Special Program.
Abstract (Originalsprache)
The mechanical properties of steel’s inter-critically reheated coarse-grained heat-affected zone (ICR CGHAZ) directly affects the service life of machinery equipment. The hardness and toughness of ICR CGHAZ can be optimized simultaneously through tailoring microstructure where cooling rate plays a key role. In this work, the samples with different cooling rates was prepared using thermal simulation. The granite bainite (GB), bainite ferrite (BF) and MA were formed at a 1 °C/s (CR1) cooling rate, while BF and MA were formed at 10 °C/s (CR2) and 30 °C/s (CR3) cooling rates. With the increase of cooling rate, the effective grain size decreased and the number of hard phases increased, resulting in monotonic increase of hardness (260HV3, 298HV3 and 323HV3). CR1 had sparsely distributed coarse slender MA and CR3 possessed tail-head connected MA along PAGBs, which was detrimental to toughness. Therefore, CR2 possessed the best toughness(25J). The microstructural evolution mechanism of ICR CGHAZ with different cooling rates is investigated, corresponding hardening and toughening mechanisms are discussed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Central South University, Changsha 410083, China.
- Xiangtan Iron & Steel Group Co., Ltd., Xiangtan 411101, China.
- Hunan Valin Lianyuan Iron & Steel Co., Ltd., Loudi 417100, China.
Förderung
- Chang-Zhu-Tan National Independent Innovation Demonstration Zone Special Program
Zitieren
APA
Liu, W. J., Li, H. Y., Zhou, W. H., Luo, D., Liu, D., Liang, L., & Xiao, A. D. (2023). Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates. Materials, 16(2), 581. https://doi.org/10.3390/ma16020581
Vancouver
Liu WJ, Li HY, Zhou WH, Luo D, Liu D, Liang L, et al. Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates. Materials. 2023;16(2):581. doi:10.3390/ma16020581
BibTeX
@article{Liu2023,
author = {Liu, Wen-Jian and Li, Hong-Ying and Zhou, Wen-Hao and Luo, Deng and Liu, Dan and Liang, Liang and Xiao, Ai-Da},
title = {Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates},
journal = {Materials},
year = {2023},
volume = {16},
number = {2},
pages = {581},
doi = {10.3390/ma16020581}
}
EUVIMED