Wood Residue-Derived Biochar as a Low-Cost, Lubricating Filler in Poly(butylene succinate-co-adipate) Biocomposites
Materials · 06.01.2023 · 16 (2) · 570
DOI: 10.3390/ma16020570 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.01.2023. Verfasst von Miriam Cappello und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, National Sustainable Mobility Center, Italian Ministry of University and Research Decree.
Abstract (Originalsprache)
This study focused on the development of a novel biocomposite material formed by a thermoplastic biodegradable polyester, poly(butylene succinate-co-adipate) (PBSA), and a carbonaceous filler as biochar (BC) derived by the pyrolysis of woody biomass waste. Composites with various BC contents (5, 10, 15, and 20 wt.%) were obtained by melt extrusion and investigated in terms of their processability, thermal, rheological, and mechanical properties. In all the composites, BC lowered melt viscosity, behaving as a lubricant, and enhancing composite extrudability and injection moulding at high temperatures up to 20 wt.% of biochar. While the use of biochar did not significantly change composite thermal stability, it increased its stiffness (Young modulus). Differential scanning calorimeter (DSC) revealed the presence of a second crystal phase induced by the filler addition. Furthermore, results suggest that biochar may form a particle network that hinders polymer chain disentanglement, reducing polymer flexibility. A biochar content of 10 wt.% was selected as the best trade-off concentration to improve the composite processability and cost competitiveness without compromising excessively the tensile properties. The findings support the use of biochar as a sustainable renewable filler and pigment for PBSA. Biochar is a suitable candidate to replace more traditional carbon black pigments for the production of biodegradable and inexpensive innovative PBSA composites with potential fertilizing properties to be used in agricultural applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56122 Pisa, Italy.
ORCID-Profile: Miriam Cappello, Damiano Rossi, Sara Filippi, Patrizia Cinelli, Maurizia Seggiani
Förderung
- European Union
- National Sustainable Mobility Center
- Italian Ministry of University and Research Decree
Zitieren
APA
Cappello, M., Rossi, D., Filippi, S., Cinelli, P., & Seggiani, M. (2023). Wood Residue-Derived Biochar as a Low-Cost, Lubricating Filler in Poly(butylene succinate-co-adipate) Biocomposites. Materials, 16(2), 570. https://doi.org/10.3390/ma16020570
Vancouver
Cappello M, Rossi D, Filippi S, Cinelli P, Seggiani M. Wood Residue-Derived Biochar as a Low-Cost, Lubricating Filler in Poly(butylene succinate-co-adipate) Biocomposites. Materials. 2023;16(2):570. doi:10.3390/ma16020570
BibTeX
@article{Cappello2023,
author = {Cappello, Miriam and Rossi, Damiano and Filippi, Sara and Cinelli, Patrizia and Seggiani, Maurizia},
title = {Wood Residue-Derived Biochar as a Low-Cost, Lubricating Filler in Poly(butylene succinate-co-adipate) Biocomposites},
journal = {Materials},
year = {2023},
volume = {16},
number = {2},
pages = {570},
doi = {10.3390/ma16020570}
}
EUVIMED